EMEIT 2011: Harbin, Heilongjiang, China

• Ying Hai, Jing-yu Chen:
  RMS and power measurements based on Wavelet packet decomposition using special IIR filter bank. 1-4
  
• Xiaoming Han, Yan Chen:
  GrC and ANN based fault diagnosis method of distribution network. 5-8
  
• Chun-mao Liu, Yun-gang Zhang, Hong-ying Wang:
  Linux-based remote monitoring and control of CNC machine tool of SQLite. 9-12
  
• Chunfang Liu, Xiumeng Ren, Limei Wang:
  Auto disturbance rejection control for beam magnetic suspension system of gantry-moving type numerical control machine tool. 13-16
  
• Xingcai Zhou, Changchun Tan:
  Monte Carlo EM algorithm for two-component mixture of generalized linear random effects models with varying coefficients. 17-20
  
• Chunfang Liu, Dianbo Fu, Tong Wang:
  H∞ control for magnetic suspension system of gantry-moving type numerically controlled machine tool crossbeam. 21-23
  
• Juqing Yang, Jiaoyue Liu, Hongying Wang:
  Study of hydraulic fault diagnosis based on power switchgears. 24-26
  
• Lei Wang, Leijuan Ma:
  A hybrid artificial fish swarm algorithm for Bin-packing problem. 27-29
  
• Hongpu Liu, Hongying Wang:
  Research about the extraction of signal feature of film instability rotor. 30-32
  
• Leijuan Ma, Bing Zheng:
  The development of virtual experimental platform of industrial control based on configuration. 33-35
  
• Haidong Ren, Erbao Peng:
  A study on the stress distribution of pressure vessel and saddle support. 36-39
  
• Wenpeng Xu, Fen Luo, Xiaohuan Qiang:
  Sketch-based garment modeling with constrained harness. 40-43
  
• Feng Yang, Hongying Wang:
  Study for mechanical transmission proposal of peristaltic pipe robot. 44-47
  
• Zhi Chen, Guowei Huang:
  Multi-path with probable performance for congestion control in DHT networks. 48-51
  
• Chengrong Wu, Jue Wang, Jianping Zeng:
  A network traffic awareness architecture for universal redundancy elimination. 52-55
  
• Hui Yu, Li-Fang Wang, Yun-Lei Zhu, Zhong-qiu Zhang:
  Design and implementation of information management system based on M-Station technique. 56-58
  
• Dejun Liu, Dali Gong, Zhonghua Ma, Yue Liu:
  Design and implementation of PDA-based mobile inquiring system for oil well logging information. 59-62
  
• Ling Xu, Gang Liu, Chao-wei Duan:
  Design and implementation of intelligent ozonizer based on Atmega8. 63-66
  
• Yongzhuang Li, Chunfeng Ye:
  The analysis of CASE tools to the efficiency of software developmen. 67-69
  
• Zhaoxia Tang, Ting Chen:
  Image segmentation algorithm based on improved GA and OTSU. 70-72
  
• Baozhong Qu, Lingjin Qu:
  Research on conceptual design of heavy-duty truck frame based on topology optimization. 73-76
  
• Rong-zheng Xu, Wei Zhou:
  The finite element analysis of the coach body frontal crash and structure improvement. 77-82
  
• Guo-tong Zhang, Yang Liu:
  Analysis & rearch on the design of automation system for finite element process based on HyperWorks. 83-86
  
• Xiaohuan Qiang, Jianchun Fu:
  Research on the three-dimensional modeling of roadway for coalmine based on GIS. 87-90
  
• Shoufeng Jin, Yuewen Su:
  Dynamic simulaion of multibody system with planar clearance joint. 91-94
  
• Guoqing An, Donghui Liu, Weilu Zhu, Kejun Sun:
  A rotor fault intelligence diagnosis system based on virtual instrument. 95-97
  
• Zhuoyan Chen:
  The research of software development supporting environment based on UML. 98-101
  
• Jian Lan, Jingye Yan, Ji Wu, Hao Liu:
  Design of digital correlator in the FPIR system. 102-105
  
• Bo Yang, Xueyuan Wang:
  Selection of parameter for SYN flood source-end detection. 106-109
  
• Qiaojun Li, Qianru Gong, Heng Du:
  Optimum design of planet gear mechanism based on VB. 110-112
  
• Zhongwen Li, Wentao Yao, Xianjun Li, Gang Ye:
  Research on configurable strategy of spacecraft data management system. 113-116
  
• Suling Li, Lina Liu, Dawei Chen:
  Fuzzy control and simulation of the constant pressure water supply system for small-type water works. 117-120
  
• Suling Li, Junying Liu, Qianqian Jiang:
  The design and implementation of leaf-spring robot control system. 121-124
  
• Xiaoqiong Wang, Zhuyan Li, Jiangfeng Bai:
  Non-contact human-computer interaction system based on gesture recognition. 125-128
  
• Lifang Zhao, Shuguo Zhao:
  Virtual design of bike based on SolidWorks. 129-132
  
• Chunxia Zhao, Longhua She, Wensen Chang:
  Analysis of pendulum-structure influencing on guidance systm for high-speed Maglev train running on curve. 133-137
  
• Ming Li, Ming Liu, Lin Gong, Dingjun Hu:
  Scene simulation of navigation simulator based on Creator and Vega. 138-140
  
• Peiying Li, Yutian Pan, Yanqiang Ma, Qingzhang Qin:
  Study on an active voltage equalization charge system of a series battery pack. 141-144
  
• Jing Li, Jing Yang:
  Integration benefit allocation solution for reverse supply chain. 145-148
  
• Dan Zheng, Yao Wang:
  Application of an artificial neural network on railway passenger flow prediction. 149-152
  
• Lichang Wang, Guo Tao, Zhizhang Wang:
  Application research of data mining on reservoir characterization. 153-156
  
• Wei Zhou, Dali Gong, Yaru Xue, Caiping Liu:
  Collision detection for 6-DOF parallel-link CMM. 157-160
  
• Qize Peng:
  Research on functional testing system of mechanical section in oil logging devices. 161-164
  
• Wen Hui, Chuang Lin, Hai-ying Zhao, Yang Yang:
  Effective load balancing for cloud-based multimedia system. 165-168
  
• Jiangping Huang, Kaihua Chen, Qianjin Yu:
  Fuzzy PID control study and simulation of gas collector pressure of coke ovens. 169-172
  
• Tong Zhou, Jingtao Hu:
  Design and realization of EtherCAT master. 173-177
  
• Hui Zhang, Yongqi Wang, Chen Deng:
  Application of gesture recognition based on simulated annealing BP neural network. 178-181
  
• Jing Bai, Tiecheng Pu, Jisheng Xing, Guocheng Niu, Shuran Zhang, Qiang Liu:
  Research on energy consumption analysis of beer brewing process. 182-185
  
• Jingsong Wu, Hongan Li:
  Design and research for intelligent teaching platform based on RMXP. 186-188
  
• Xinying Liu:
  Study on the packet transmission method of audio and video. 189-192
  
• Baokuo Chen, Yanhui Wang, Zilong Wang, Xuezhong Xiao:
  Airfoil shear probe performance analysis and optimal design. 193-196
  
• Yijun Wang, Yanhui Wang, Zhigang He:
  Bouyancy compensation analysis of an autonomous underwater glider. 197-200
  
• Lili Xin, Jihui Liang:
  Analysis on vibrating forming system considering slowly varying parameter. 201-204
  
• Yanjie Deng, Wensheng Cao, Cheng Zhang, Shuran Zhang:
  Research on port cluster based logistics collaborative platform construction. 205-209
  
• Hangxia Zhou, Peng Zheng, Bin Sun:
  The comparison of algorithms for sloving the inverse problem of line source. 210-214
  
• Liyan Wang, Lixiu Zhang, Mengyuan Xu:
  Simulation analysis on the influence of magnetic field distribution caused by motor spindle air-gap. 215-218
  
• Lixiu Zhang, Yajing Zhou, Xiaohui Liu:
  Simulation analysis and physical experiment of the inverter's influence on ceramic electric spindle's vibration. 219-222
  
• Wei Wu, Yong Huang:
  The analysis and design of office automation system based on workflow. 223-225
  
• Hai-wei Fan, Chang-li Zhang:
  A network based semantic similarity measure for knowledge management in social tagging systems. 226-229
  
• Caiyan Yu, Xiaoshi Zheng, Yanling Zhao, Guangqi Liu, Na Li:
  Review of intelligent video surveillance technology research. 230-233
  
• Peipei Ling:
  Based on web application front-end performance optimization. 234-237
  
• Jinghui Hao, Ping Huang, Xuyou Li, Hanrui Yang, Junwei Yang:
  Polarization errors analysis of waveplate in sagnac optical fiber current sensor. 238-241
  
• Bin Sun, Hangxia Zhou, Cong Yu:
  Application of particle swarm optimization to the identification of thermal property parameters of porous media. 242-245
  
• Yuan Wang, Shuhua Li, Haifeng Zhang:
  Design and realization of the LED management system based on PHP. 246-248
  
• Jihui Liang, Lili Xin:
  ADAMS-based MacPherson front suspension kinematics simulation. 249-252
  
• Ling Cai, Xin Zhang:
  Study on the control strategy of hybrid electric vehicle regenerative braking. 253-256
  
• Junru Hu:
  The improved elliptic curve digital signature algorithm. 257-259
  
• Weitong Huang, Baoxing Jiao, Jiatuo Xu:
  Decision tree based sub-healthy states detection system. 260-263
  
• Hongyuan Zhang, Lingxi Wang:
  Application and study of 3D alignment technology for the inspection of automobile punching parts. 264-267
  
• Lili Xin, Jihui Liang:
  Analysis on vibration forming system in consideration of plastic deformation of materials. 268-270
  
• Hailong Jia, Xiaojie Wang:
  The research on multipath routing algorithm of wireless mesh network. 271-274
  
• Hailong Jia, Wang Yun:
  Research on agent-based load balancing model for RFID middleware. 275-278
  
• Xiaohong Suo, Xian Chi, Xiaoxia Sun, Hujun Wang:
  Modeling and simulating of facility layout based on manufacturing costs. 279-283
  
• Chao Dai, Jihui Liang:
  Design of motor power assembly mounting system. 284-286
  
• Xuexia Gao, Tao Kuang:
  Research of word similarity model based on HowNet. 287-290
  
• Shu-ping Le, Hong Zeng, Jian Qiu, Song Zhang:
  Design and implementation of wireless power monitoring system for public buildings. 291-294
  
• Xiangdong Su, Yongxu Li:
  Uniform framework for direct volume rendering. 295-298
  
• Juntao Xue, Shiming Wang, Jie Shi:
  Serial fingerprint device driver development based on EFI. 299-302
  
• Qingyun Chi:
  Research on incremental decision tree algorithm. 303-306
  
• Haigang An:
  A new method of chaotic synchronization based on numerical simulation. 307-309
  
• Zhi Hong An, Jian Guang Zhang:
  Design of purchase, sales and inventory system on B/S mode. 310-312
  
• Ping Chen, Yong Xia Li:
  The basic concepts and types of image. 313-315
  
• Dewen Seng, Ping Sun:
  Visualization of complicated objects for hydraulic engineering based on OpenGL. 316-319
  
• Songjie, Junfeng Yao, Chengpeng Wu:
  Cloud computing and its key techniques. 320-324
  
• Rui Wang, Ying-Wu Peng, Qing-Min Li:
  Warship brigade complex mission reliability modeling. 325-328
  
• Feng-lin Cheng:
  Mellin transform solution for the model of European option. 329-331
  
• Songmei Yuan, Shouqing Huang, Xiangcheng Chu, Renlong Gao:
  Optimization methods for acoustic performance of piezoelectric panel loudspeaker. 332-337
  
• Wei Zhao, Lei Li:
  Improved K-DOPs collision detection algorithms based on genetic algorithms. 338-341
  
• Fulai Yao, Hexu Sun:
  The stability criterion of pumps. 342-344
  
• Yan Wang, Zongquan Deng, Rongqiang Liu, Hongwei Guo:
  An efficient algorithm for detecting isomorphism of deployable truss structures using incident degree. 345-346
  
• Qi Li, Huajun Feng, Zhi-hai Xu, Yue-ting Chen:
  Study on performance evaluation and frequency characteristic for real-time image stabilization system. 347-350
  
• Zhifei Tang, Mike Deng, Chuangbai Xiao, Jing Yu:
  Projection onto convex sets super-resolution image reconstruction based on wavelet bi-cubic interpolation. 351-354
  
• Haifeng Liu, Mike Deng, Chuangbai Xiao:
  An improved best bin first algorithm for fast image registration. 355-358
  
• Bo Qu, Zhaozhi Wu:
  Design and implementation of embedded secure web server for ARM platform. 359-362
  
• Yong Xin, Xinfa Deng, Guangshen Luo:
  Effect of annealing on the structure and magnetocaloric properties of Gd5Ge2(Sl2-xAlx) compounds. 363-367
  
• Haiyong Xu, Guotao Wang:
  GALBF: Geodesic-Aided LBF method. 368-372
  
• Bowen Zhong, Zhenhua Wang, Liguo Chen, Lining Sun:
  Kinetic study of a novel trans-scale precision positioning stage based on stick-slip effect. 373-376
  
• Kai Yu, Bin Hu, Milan Ye, Zhenming Yuan:
  Chinese calligraphy system in CADAL. 377-380
  
• Haiyang Fu, Wei Xiao, Qiwang Cai, Hui Yu:
  Smart antenna receiver implemented in base-band and its performance evaluation. 381-384
  
• Lian-Kui Qiu, Yu-zhu Zhao, Yan-xia Zhang:
  Adaptive friction identification and compensation based on RBF neural network for the linear inverted pendulum. 385-388
  
• Xuemei Huang:
  A mechatronics educational laboratory platform for manufacturing automation based on Googol FMS. 389-392
  
• Kan Zhao, Qiang Li, Guosheng Zhang, Wei Wang, Zhongxiang Li:
  Research on driving characteristics of double-articulated bus docking the bay bus station. 393-396
  
• Mengsheng Wang, Ruiping Zhou, Xiang Xu, Yanguo Wang:
  Research of the nonlinear torsional vibration of the marine diesel generator shaft system. 397-400
  
• Yanhui Ai:
  Pressure and stress analysis for an underwater vehicle. 401-403
  
• Rongmin Cao, Huixing Zhou, Zhongsheng Hou, Keshuai Jia:
  Data-driven model-free direct adaptive generalized predictive control for linear motor based on cSPACE. 404-408
  
• Yongdang Chen, Xiao Xiao, Huijuan Ren, Meihong Shi:
  Application research of knowledge management and engineering for production design organization. 409-412
  
• Xuemei Huang:
  Implementing intelligence and distributed execution mechanism for flywheel energy storage system in micro grid. 413-416
  
• Qiang Li, Nan Qi, Yongjian Gong:
  An algorithm of multi-stroke combination in the automotive styling. 417-420
  
• Xiao-lu Ren, Chang-hong Wang, Guo-xing Yi:
  Ducted fan UAV hovering attitude control. 421-424
  
• Qiang Li, Xianfei Zhao, Changfu Zhao, Yongjian Gong:
  3D Sketching in AutoSketch. 425-428
  
• Huifeng Tan, Xianghong Bai, Guochang Lin:
  The influence of natural weathering on the property of polyester fabric. 429-432
  
• Qiang Li, Yanping Tang, Yongjian Gong:
  Geometry standardization of arbitrary multi-stroke sketching. 433-436
  
• Chao-jiang Hu, Quan-fa Yang, Xiao-chong Li, You-zhi Yuan:
  Improved parameterization method and its application on solving optimal control problem. 437-439
  
• Baozhong Qu, Hongying Wang:
  Study of PID simulation based on PMAC servo system. 440-443
  
• Erbao Peng, Ling Yu, Hongying Wang:
  Research on structural design of robot leg based on Pro/e. 444-447
  
• Erbao Peng, Yingzhan Hu, Hongying Wang:
  Research of rolling bearing fault diagnosis based on wavelet. 448-450
  
• Zengfang Shi, Chao Wang:
  Application of fuzzy control in temperature control systems. 451-453
  
• Bo Wu, Jianying Li, Jincheng Li, Junpeng Shao:
  Research on the thermal deformation field of exhaust valve for high temperature steam booster pump based on ANSYS. 454-457
  
• Bo Wu, Zhi Huang, Junpeng Shao, Xiaodong Yu:
  Research on the pressure field of hydrostatic center rest. 458-461
  
• Ming Xu:
  Analysis of melt fracture during the process of macromolecule material's extruding moulding. 462-465
  
• Baoquan Geng:
  Time-domain analysis and research on blasting vibration signals based on Fourier transform. 466-469
  
• Danhong Li:
  Similarity theory which used in knuckle-joint press design. 470-473
  
• Hongxia Zhong:
  Data base management system accounting software. 474-476
  
• Yiming He:
  Load adjusting system of independent wind power generation. 477-480
  
• Deliang Wang, Yugai Gao:
  Combustion performance of vehicle diesel motor. 481-484
  
• Yujun Bao, Xiaoyan Jiang:
  Network electric energy meter design. 485-488
  
• Zhengyun Ren:
  Research on expert system model based on SWRL. 489-492
  
• Chi Zhang, Shao-Liang Chen, Xing-Ping Liu:
  Analysis of chemical constituents of volatile oil of scrophularia ningpoensis hemsl GC-MS. 493-496
  
• Junren Zhao, Rulan Wang, Weili Hong, Rong Zhang:
  Study on isolation and identification of the Lactic acid bacteria in airing wuchang fish and production performance of strains. 497-501
  
• Yong Peng, Yunhui Wu, Yulin Yang, Runan Huang, Changqi Wu, Xiaowen Qi, Zhe Liu, Bin Jiang, Yingjie Liu:
  Study on the control of biological behavior on carp induced by electrophysiological stimulation in the corpus cerebelli. 502-505
  
• Zhixin Huang, Ji-hua Guo, Lei Yang, Jian-bo Shao:
  Studies on the influence of sputtering parameters on magneto-optical properties of GdTbFeCo thin films. 506-508
  
• Lu Yi, Wu Yu Ping:
  The realization of polynomial fit between EMF and temperature changes based on least squares fit. 509-512
  
• Zhongqiao Zheng, Zhen Wang, Yanhong Zhang:
  The design of a symbol timing method in high-level modulation system. 513-515
  
• Yanhong Zhang, Dean Zhao, Jiansheng Zhang:
  Research on PID controller based on the BP neural network. 516-519
  
• Hongyang Zhao:
  Discussion on the Thevenin's theorem and Norton's theorem. 520-522
  
• Gang-bing Zhang:
  Novel algorithm for frequency estimation of sinusoid signal with random length. 523-526
  
• Ya-ping Xu, Wen-zhong Li:
  New undergraduate college students common psychological problems and intervention strategies. 527-530
  
• Xiaoyan Jiang, Yujun Bao:
  Design of three-lift controller based on FPGA. 531-533
  
• Qing-long Li:
  The research on the influences of relative factors for factual depletion layer characteristics in MOSFETs. 534-537
  
• Fuzhou Feng, Aiwei Si, Chaosheng Zhang:
  Research on fault recognition method based on variable-risk SVM. 539-543
  
• Haichun Qin, Yi Chen:
  A visual analysis system for sewage treatment data. 544-547
  
• Guoxing Gao, Zhenzhan Wang, Hao Lu:
  Simulation of the Non-Gaussian scattering approximation model on rough sea surface. 548-551
  
• Yushan Sun, Lei Wan, Yueming Li, Liwei Li, Guocheng Zhang:
  S plane control based on parameters optimization with simulated annealing for underwater vehicle. 552-556
  
• Chang Li, Guangbing Zhao, Xing Han:
  Finite element analysis of hot-rolled seamless pipe rolling process elastic-plastic deformation. 557-560
  
• Xiaofang Lou, Wei Zhang, Junxian Liu, Huihua Cheng, Fengxing Zou:
  An improved threshold cluster analysis algorithm for the energy consumption optimization of the aluminum industrial production. 561-566
  
• Qiubo Huang, Wen Zhang:
  Study on the straightening quality of steel pipe based on the computer numerical simulation technology. 567-570
  
• Song Yang, Lin Chen:
  A face and eye detection based feedback system for smart classroom. 571-574
  
• Guangming Lv, Jian Wang, Xiaomeng Sun:
  Research on virtual manufacturing models of a new type of taper ball-end milling cutter. 575-578
  
• Xianjiang Shi, Qingchun Meng, Han Sun, Linjie Chai:
  Experiment and simulation of torsional vibration based on sensorless detection technology under variable-frequency power sources. 579-583
  
• Ruzhi Gong, Hongjie Wang, Yang Yao, Fengchen Li, Daqing Qin:
  CFD detection for inner flow and presure fluctuation in a hydraulic tubine. 584-587
  
• Wensheng Ma, Zhusheng Liu, Zhaobo Chen:
  Study of leakage and stability in labyrinth seal using CFD. 588-591
  
• Wensheng Ma, Zhaobo Chen, Yinghou Jiao:
  Leakage and whirl speed study in labyrinth seal using CFD. 592-595
  
• Xiao Zheng, Jie Mi:
  Optimization and analysis on unmanned electric light armored reconnaissance vehicle gearbox. 596-599
  
• Yongqing Jiang, Jingrui Zhao, Yang Liu, Zhonghua Wang, Bingxin Wei, Tianling Lv:
  The data collection of hybrid traffic simulation system. 600-603
  
• Junzheng Huang, Aiping Li, Liyun Xu:
  Economic production quantity model research based on facility layout planning. 604-608
  
• Xianwei Rong, Xiaoyan Yu:
  An electric power monitoring and management system based on wireless sensor network. 609-612
  
• Shi Jie:
  Ageing condition inspection system for electrical contact based on micro-current contact resistance trend tracker. 613-616
  
• Sheng-sheng Wang, Dayou Liu:
  Integrating multi-relations and multi-domains in qualitative spatial reasoning. 617-620
  
• Peipei Shen, Changjun Zhou, Xiong Chen:
  Automatic Speech Emotion Recognition using Support Vector Machine. 621-625
  
• Changjun Zhou, Peipei Shen, Xiong Chen:
  Research on algorithm of state recognition of students based on facial expression. 626-630
  
• Longshen Liu, Mingxia Shen, Xianlin Zhao, Yuwen Sun, Mingzhou Lu, Yingjun Xiong:
  Embedded forest fire monitoring and positioning system based on machine vision. 631-635
  
• Xiaowang Guo, Jianyong Zhu:
  Research on security issues in Wireless Sensor Networks. 636-639
  
• Chao Wang, Huajun Chen, Peiqin Gu, Tong Yu:
  Relation discovery in medicine through Semantic Graph Routing. 640-644
  
• Zongquan Deng, Xuebing Fan, Haibo Gao, Liang Ding:
  Influence analysis of terramechanics on conceptual design of manned lunar rover's locomotion system. 645-648
  
• Zhang Qian:
  Research on multi-objective location-routing problem (MLRP) with random analysis for regional distribution. 649-653
  
• Kaihui Ding, Qun Ding, Run Zhe Lan:
  Parameters estimation of LFM signal based on fractional order cross spectrum. 654-656
  
• Jinxin Zhao, Yumin Su, Lei Ju, Jian Cao:
  Hydrodynamic performance calculation and motion simulation of an AUV with appendages. 657-660
  
• Jianing He, Wei Zhang, Lifang Yang, Hongshen Zhang:
  Research and applications on a soak boiler with the thermal insulating layer in pulping and paper making technique. 661-665
  
• Haibo Gao, Weihua Li, Liang Ding, Zongquan Deng, Zhen Liu, JunLong Guo:
  Algorithm analysis for a rover simulation platform. 666-669
  
• Zidan Shan:
  A self-adapting improvement Particles Swarm Optimization algorithm and application in Multi-Criteria Group Decision-making. 670-673
  
• Jianye Guo, Yanli Zhang, Jiashun Shi:
  The analysis on the singularity of a 3-UPS Parallel Machine Tool. 674-677
  
• Shengli Chu, Laibin Zhang, Jianchun Fan, Jiye Sun, Yuqi Pei:
  Research on casing wear monitoring technique based on detection of tool joints and its field test. 678-682
  
• Guoyan Yang, Guoyin Zhang:
  An energy efficient cross-layer MAC for wireless sensor networks. 683-686
  
• Guoyan Yang, Guoyin Zhang:
  A power control algorithm based on non-cooperative game for wireless sensor networks. 687-690
  
• Haitao Luo, Yuwang Liu, Hongguang Wang, Weijia Zhou:
  Vibration characteristic analysis of spot-welding robot based on ADAMS/Vibration. 691-695
  
• Xincan Fan:
  Web caching system research and implementation of cluster. 696-699
  
• Deng Pan Zhang, Rui Hong Wang, Jian Fa Cai:
  Coal mine reconfigurable monitoring model based on Wireless Sensor Network. 700-703
  
• Kefei Song, Shurong Wang:
  Electronic system design of ultraviolet ozone vertical profile probe for aerography satellite. 704-707
  
• Zhenghua Xue, Jianhui Li, Yuanchun Zhou, Kang Chao, Weiguo Zhang:
  Self-configuration model of service on large-scale server cluster system. 708-712
  
• Dong Xu, Biao Wang, Mingshuang Li, Xiao Ye:
  ZnO-Bi2O3-based varistor ceramics prepared by direct high-energy ball milling of the dopants. 713-716
  
• Yanwen Li, Jinfeng Gong, Hongwei Zhang, Hui Rong:
  Design of automotive CAN network management based on OSEK standard. 717-721
  
• X. J. Liu, H. Ni, K. Zhao, S. Q. Zhao, Yu-Chau Kong, H. K. Wong:
  Electronic transport and photovoltaic properties of La0.4Ca0.6MnO3/Si heterojunction at high temperature. 722-724
  
• D. Yu, H. Ni, K. Zhao, S. Q. Zhao, S. L. Da, W. S. Zhang, P. R. Yang, Yu-Chau Kong, H. K. Wong:
  Effects of oxygen stoichiometry on the photovoltaic properties of La0.4Ca0.6MnO3-δ epitaxial films grown on miscut MgO substrates. 725-728
  
• Qi Yue, Caiwen Ma, Xin Wang:
  Canonical signed digit encoding based optimal design for FIR filters. 729-732
  
• JianCheng He, YanHua Shen, WenMing Zhang, Bo Zhang:
  Multi-objective optimization design of mining truck wheel reducer based on analysis of fatigue life. 733-736
  
• Jiuyu Du, Hewu Wang:
  Research on modeling, simulation and control of new type power split hybrid powertrain. 737-741
  
• Ye Yao, WenMing Zhang, BoQiang Shi, CaiZheng Wang:
  Experiment and simulation research of engine cooling fan in dump truck. 742-745
  
• Gu Yang:
  Analysis and modeling for the framework structures of light-of-sight stabilization tracking platform. 746-749
  
• Lei Sun, Jinhua Zhang, Sunan Wang, Xiaohu Li:
  EEG signal decomposition using wavelet packet on DSP. 750-753
  
• Jie Xu:
  Design of active disturbance rejection controller for the velocity loop of optical tracking servo system. 754-757
  
• Yang Zhang, Limin Tao:
  Factors analysis of the sound field for audio directional systems. 758-761
  
• Ru-xiong Li, Xiao-chun Lei:
  Analyzing system of electric signals in spot welding process. 762-766
  
• Gao-feng Li, Zhi-an Yang, Xiao-yan Xi:
  The third superharmonic resonance of inclined beam subjected to harmonic excitation in temperature field. 767-770
  
• Bo Fan, Guanghui Shi, Yixin Yin, Cunfa Fu, Juwei Zhang:
  Study on torque ripple reduction of direct torque control system based on DSVM. 771-774
  
• Yao Dai, Shimin Li, Lei Zhang, Junfeng Liu, Xiao Chong:
  The higher order asymptotic fields for anti-plane oblique crack with physical weak-discontinuity. 775-778
  
• Kaige Qin, Zhongren Wang:
  3D Reconstruction of metal parts based on depth from focus. 779-781
  
• Yao Xiao, Gang Zhao, Chunhua Yin:
  Analysis of the bullwhip effect based on different information sharing models. 782-786
  
• Liangfei Xu, Jianqiu Li, Minggao Ouyang, Jian Feng Hua:
  Integration of PEM fuel cell/battery powertrain: EMI noises and power split strategy. 787-792
  
• Songlin Xu, Yonggui Liu, Hang Zheng, Daorong Wang:
  In-material measurement technique for brittle materials subjected to shock loading. 793-796
  
• Peixin Ye:
  Quadrature formula for some classes of analytic functions. 797-799
  
• Guanghui Zhou, Zhongdong Xiao, Ben Wang, Pingyu Jiang:
  Dynamic identifying and tracking framework for cutters using RFID technology in digital workshop. 800-803
  
• Qiang Dou, Jindong Li, Zengfu Pan:
  Heat flux analysis of space camera with thermal door. 804-807
  
• Kemin Wang, Yongbin Wang:
  A stochastic model checking method for the usability of clusters about distributed rendering system. 808-812
  
• Qiaogong Dong, Yujun Wen, Pengzhou Zhang, Jiuqiang Jiang:
  Design and realizing of the lightweight cable digital television data analysis system. 813-815
  
• ChangMing Xia, Ying Han, GuiYao Zhou, LanTian Hou:
  Preparation of Yb³⁺-doped silica-based glass for high power laser applications. 816-819
  
• Chunjun Ji, Yang Wang:
  The design and flow simulation of the volute casing of a mixed flow pump. 820-823
  
• Yijun Wang, Yanhui Wang, Zhigang He:
  Bouyancy compensation analysis of an autonomous underwater glider. 824-827
  
• Yu Tao, Kefei Song:
  Design of VxWorks-based software architecture for space optical remote sensor. 828-831
  
• Li Yang, Changyin Liang, Linfang Yang:
  The design and implementation of MDF incoming power disturbance alarm system. 832-836
  
• Jianing He, Wei Zhang:
  Optimum design and research on the involute gear tooth profile. 837-840
  
• Zhenghua Xue, Jianhui Li, Geng Shen, Yuanchun Zhou, Yang Zhang:
  A customized dynamic array for job scheduling queue of a large-scale server cluster. 841-844
  
• Dacheng Guo, Xiaoye Qi:
  The application of PID controller optimized by genetic algorithm in valve-controlling asymmetrical cylinder system. 845-848
  
• Xuguo Huang, Ping Sun, Zhi Wang:
  3-DOF MEMS Gyroscope modeling and design. 849-852
  
• Xiao Lei Wang, Zuwei Tan, Xuehong Chen:
  Reserch on the valuation model of technical enterprises. 853-855
  
• Ya-min Wang, Li-ying Ban, Rui-Qiang, Xiao-min Wang:
  Application PTS reduce PAPR OFDM system technology. 856-858
  
• Qiuxuan Wu, Yanbin Luo, Xiaoni Chi, Xiaochun Lou:
  Motion error analysis of modular self-reconfigurable robot M-Cubes based screw theory. 859-866
  
• Huang Hao, Lei Huihu:
  Modeling and simulation of flow field of main spool in servo valve. 867-870
  
• Geqiang Li, Hanjie Wang, Xiaodong Huang:
  Research of non-servo valve electro-hydraulic servo system. 871-874
  
• Junpeng Shao, Mingshan Chi, Yanqin Zhang, Bin Xu:
  Kinematic simulation of polishing head oscillating mechanism based on COSMOSMotion. 875-878
  
• Yingchao Han, Hongmei Li, Jinghui Qiu:
  Implementation of TS streams pack/unpack and transport in DSP. 879-882
  
• Yingchao Han, Hongmei Li, Jinghui Qiu:
  The analysis and summary about energy saving technologies of wireless sensor network. 883-885
  
• Huimin Yang, Lihai Wang, Yumei Wang:
  Signal characteristic extractio of wood defects based on wavelet packet. 886-889
  
• Weihua Chu:
  Research and realization on the control strategies of blow-down supersonic wind tunnel. 890-893
  
• Chunyu Liu, Xing Zhong, Yongjie Piao, Guang Jin:
  Research on energy characteristics of aerospace relay mirror system. 894-896
  
• Ru Zhang, ChangHu Chen:
  Intelligent green production of raw materials in ceramic technology of choice. 897-900
  
• Ru Zhang, ChangHu Chen:
  Wavelet neural network based intelligent assessment of ceramic green technology research. 901-904
  
• Li Xu, Hongbin Du:
  Research on cutting tool paths optimization of ZrB2 CNC grinding based on parametric curve interpolator. 905-907
  
• Yanwen Li, Hongwei Zhang, Jinfeng Gong, Hui Rong:
  Detection system of meter pointer based on computer vision. 908-911
  
• Junpeng Shao, Xiaodong Yang, Yunfei Wang, Xiaoqiu Xu, Yanqin Zhang, Xiaodong Yu:
  Research on thermal deformation field of heavy hydrostatic thrust bearing rotation-workbench at different auxiliary-hole position. 912-915
  
• Jixiang Li, Junfeng Wu, Peng Wang:
  Design of reduced-order H∞ controller for uncertain discrete system based on observer. 916-919
  
• Tiancong Wang, Guang Jin, Mei Kong:
  Analyze the relationship between slowlight effect and parameters of double-parallel-microring structure. 920-923
  
• Yarding Zhao, Erjun Gou, Guojian Cao, Pengao Xu, Xinyu Lv, Guojun Wang, Lin Ma:
  Study on rotary impeller refinement of 4004 Al alloy. 924-927
  
• Yanling Zhao, Fengling Wu, Jianjiao Zhang, Guojian Cao, Erjun Guo, Chaojun Zhang:
  Effect of Cerium addition on microstructure and mechanical properties of 4004 aluminum alloy. 928-931
  
• Xu Li, Fei Sha:
  Application of moment invariants in checking the overall dimension of the head cover. 932-935
  
• Liantao Ding, Xinhui Liu, Jinshi Chen, Qingbo Zhao:
  Modeling analysis and simulation research for a flexible vehicle arresting system. 936-939
  
• Xiaoqiu Xu, Junpeng Shao, Yunfei Wang, Chunxi Dai, Xiaodong Yang, Yanqin Zhang, Bo Wu:
  Research on influence of return oil groove width on temperature field of hydrostatic thrust bearing with multiple oil pads. 940-943
  
• Guangwei Shu, Reinhold Meisinger:
  State estimation and simulation of the magnetic levitation system of a high-speed Maglev train. 944-947
  
• Mingde Duan, Wuguo Zhang:
  Effects of key factors on load-carrying capacity of radial static air bearing. 948-950
  
• Mingde Duan, Boyin Li:
  Modal analysis of compound grinder for grinding end face and inner hole. 951-953
  
• Wei Lv, Yandong Li, Ruiyang Li, Qunyi Zhu:
  The simulation and experimental analysis for pneumatic drying of biomass stalk. 954-957
  
• Wei Lv, Hongwei Sun, Ruiyang Li, Qunyi Zhu:
  Numerical simulation and analysis of pneumatic drying on straw fuel. 958-962
  
• Kun Wang, Liying Su, Shucai Wang, Yueqing Yu:
  Simultaneous localization and map building based on improved particle filter in grid map. 963-966
  
• Meilan Zhou, Hao Zhang, Xudong Wang:
  Research on fuzzy energy management strategy of parallel hybrid electric vehicle. 967-971
  
• Yahui Wei, Hongmei Li, Lan Wang:
  Simulation analysis and validation on aerodynamics of tunnels on high speed railways. 972-975
  
• Shucai Wang, Liying Su, Kun Wang, Yueqing Yu:
  Moving object detection and tracking in indoor environment. 976-979
  
• Yong Qin, Jing Hou, Lijie Wang:
  Measuring system for mobile robot based on multiple sensors. 980-983
  
• Dong-Xing Wang, Bing Bing Jiao, Yue Wang, Yue Liu, Hong Zhang:
  Operation characteristics of organic semiconductor copper phthalocyanine bipolar mode thin film transistor. 984-986
  
• Ningzhi Jin, Xudong Wang, Hanying Gao, Jinfeng Liu:
  Sliding mode based speed regulating of PMSM MTPA control system for electrical vehicles. 987-992
  
• Jian Zhang, Xiaoming Zhong, Jia Jia, Xiaoyan Zhu:
  Study for speed management technology of national road. 993-997
  
• Jian Zhang, Jia Jia, Xiaoming Zong, Xiaoyan Zhu:
  Concepts of village roads safety facilities construction. 998-1001
  
• Guoxu Zheng, Mingxin Song, Yunlong Dai, Tong Wu, Yu Zhao:
  Designing of single phase electricity meter based on ADE 7755. 1002-1005
  
• Xiufen Xu, Yongqiang Hou, Ying Cao, Lijun Wei:
  The research and design of oil field associated gas recovery device. 1006-1008
  
• Li Xu, Guang Yang, Shubo Liu, Minjie Zhu:
  An advanced processing technology for fairing made of zirconium diboride composite material. 1009-1012
  
• Li Xu, Chao Liang, Ke Wu:
  Technological parameters simulation of cutting red copper by wire cut electrical discharge machining. 1013-1016
  
• Wenhu You, Ming Yan, Mao Wang, Yongheng Yue:
  State feedback control of saturated switched systems and its application to turntable. 1017-1020
  
• Sen-Yue Zhang, Yi-Bo Li:
  Simulation research on FLS_SVM in sensor fault diagnosis. 1021-1024
  
• Hongwei Liu, Wenwen Guo, Liang Chu, Xiaowei Hao:
  Transient optimization of drive control strategy for pure electric passenger car. 1025-1028
  
• Mao Wang, Yue Gu, Guoqing Li:
  An improved regional stabilization method for time-delay system with actuator saturation. 1029-1032
  
• Yongling Fu, Meng Zhang, Haitao Qi, Gaocheng An:
  Application of heat pipe technology in the design of hydraulic motor pump. 1033-1036
  
• Hongwei Liu, Xiaoyin He, Liang Chu, Junhui Tian:
  Study on control strategy of regenerative braking for electric bus based on braking comfort. 1037-1040
  
• Guangwei Shu, Wen Zang:
  Research of the model for current transformer in real-time simulation of electric power system. 1041-1044
  
• Xiaogang Wu, Fuyuan Yang, Languang Lu, Minggao Ouyang:
  Dynamic control for low cost auxiliary power unit of electric bus. 1045-1049
  
• Yangguang Xie, Guoxing Yi, Yansheng Jia, Changhong Wang:
  Realization on identification and compensation methods for the temperature model of hemispherical resonator gyro (HRG). 1050-1053
  
• Ende Wang, Feng Zhu, Yanghui Xiao, Xinxin Tong, Dan Zhu:
  The effect of spinning missile on the position calculating of the reticle infrared detecting system. 1054-1057
  
• Xin Wang, Wei Chen, Ancai Yu:
  Sliding mode rotation speed control on secondary regulation hydraulic system. 1058-1061
  
• Hui Lu, Jing Li, Bing Zhu, Yuelei Gao, Bohua Sun:
  Traction and yaw-rate control of 4WD vehicle with drive force distribution. 1062-1065
  
• Mina Shi, Xinhui Liu, Yaowu Shi, Wei Chen, Qingbo Zhao:
  Research on the sliding mode based ADRC for hydraulic active suspension of a six-wheel off-road vehicle. 1066-1069
  
• Yangyang Ma, Jie Mi:
  Research of control algorithm of medical balance bed. 1070-1074
  
• De-Xin Zhang, Ji-Xian Zou, Xue-Bo Shao, Jian-Ming Guo:
  New rapid prototyping manufacturing technology. 1075-1078
  
• Hongwei Liu, Jianrong Wu, Liang Chu:
  Design of remote monitoring and fault diagnosis system for electric vehicle. 1079-1082
  
• Yanqin Zhang, Chunxi Dai, Yunfei Wang, Bo Wu, Xiaodong Yu, Bai Qin:
  Research on influence of oil cavity shapes on carrying capacity of heavy hydrostatic bearing. 1083-1086
  
• Chunxi Dai, Junpeng Shao, Xiaoqiu Xu, Yanqin Zhang, Xiaodong Yu, Bai Qin, Bo Wu:
  Numerical simulation on cavity type influence of multiple oil pad hydrostatic guide fluid state. 1087-1090
  
• Lu Xia Mei, Ma Yun Fei, Zeng Tao:
  The mechanical performance analysis of grid structures with foam under the tests of quasi-static and dynamic loadings. 1091-1094
  
• Bai Qin, Bo Zhang, Xiaodong Yu, Yanqin Zhang, Guihua Han, Jianying Li:
  Stiffness simulation analysis of rubber bush mountings. 1095-1098
  
• Yong-de Zhang, Jin-gang Jiang, Ting Liang:
  Structural design of a cartesian coordinate tooth-arrangement robot. 1099-1102
  
• Jian-Yi Zhang, Qiang Du, Li Zhang, Bo Wu:
  Rubber paint feeling characteristic analysis and its application in product design. 1103-1106
  
• Ming Xu:
  Non-equant roll calender's structure design and analysis. 1107-1110
  
• Baoquan Geng:
  Research on the application of green function approximation in the quantum super magnets. 1111-1113
  
• T. Suresh Babu, V. Udaya Bhaskara Reddy:
  Investigation and study of Reverse Engineering and CAD/CAM integration in mold manufacturing. 1115-1118
  
• Xing-Yuan Guo, Zhan-Hui Ding, Jing Zhou, Da-Peng Xu:
  Zinc oxide hexagram microrods. 1119-1121
  
• Zhongming Ji, Xuan Xie, Zhiqiang Sun, Peizhi Chen:
  Rail pressure control of common rail diesel engine based on RBF neural network adaptive PID controller. 1122-1125
  
• Mansour Nejati Jahromi, Mahdi Naghshvarian Jahromi:
  Composition of L-shaped grounded reflector with planar monopole array to explore fan-beam antenna characteristics for DECT, 3G and 4G wireless applications. 1126-1129
  
• Zhurong Dong, Zhijun Deng:
  Design of new suspension for four-wheeled independent steering electric automobile. 1130-1135
  
• Yongxin Gao, Dong Yang, Zhijia Liu:
  Using concurrent engineering technology to design a satellite assembly. 1136-1138
  
• Wing Commander M. Sekaran, S. Mohanamurugan:
  Emission and combustion characteristics of different fuel in a HCCI engine. 1139-1142
  
• Wing Commander M. Sekaran, S. Mohanamurugan:
  Homogenous charge compression ignition (HCCI) engine operating with diesel and bio-diesel using an secondary injector. 1143-1146
  
• Huailin Ruan, Jiren Xu:
  Instantaneous feature extraction of non-stationary signal based on complex Morlet wavelet. 1147-1150
  
• Yihua Tang, Shilu Chen, Min Xu:
  Reentry trajectory planning based on genetic optimization of terminal matching. 1151-1155
  
• Shengrong Shu, Shijin Chen, Kai Cheng:
  Investigation of a novel green internal cooling in turning application. 1156-1159
  
• Peng Zhang, Xingyu Guo, Zhiguang Guan:
  Research on ellipse vibration grinding finishing technology. 1160-1163
  
• Chao Jiang, Dongsheng Li, Guofeng Zhou, Hongyu Luo:
  Precision forming technology and application for high-precision sandwich reflector panels. 1164-1168
  
• Chengmei Lin, Guisheng Jie, Zhenxing Wu, Wanzhi Rui:
  Design of networked monitoring system of PV grid-connected power plant. 1169-1172
  
• Zhenyu Zhao, Fengxia Yan, Jubo Zhu:
  Ship swaying data denoising via multiscale manifold representation. 1173-1176
  
• Jihai Liu, Dongsheng Li, Jiren Xu, Jiasong Cheng, Huaihui Gao:
  Extracting subtle feature of target signal based on double tree complex wavelet transformation. 1177-1180
  
• Qinnan Ji:
  Root locus approach in variable eigenvalues control. 1181-1184
  
• Wing Commander Muthu Kumara Samy Sekaran, B. Achu Naik:
  Analysis of flow field across blunt fin with dimples - Experimentation. 1185-1188
  
• Lei Zhou, Shumin Fei:
  Multi-model predictive functional control for a nonlinear system. 1189-1192
  
• Li Wang, Xiaojuan Li, Jianping Peng, Jinlong Li:
  Application of phased array ultrasonic technology for nondestructive testing of railway wheels. 1193-1196
  
• Xuewen He, Qiang Wang, Zhenli Zhang:
  A survey of study of FlexRay systems for automotive net. 1197-1204
  
• H. H. Chien, K. J. Ma, Jeremy J. Ramsden, Y. P. Yeh:
  Kinetic study of bacterial adhesion on biomaterials by using optical waveguide lightmode spectroscopy. 1205-1208
  
• Boyang Hu, Swamidos Sathiakumar:
  Modeling of a new multiple input converter configuration for PV/battery system with MPPT. 1209-1214
  
• Hsi-Hsin Chien, Kung-Jeng Ma, Yun-Peng Yeh, Choung-Lii. Chao:
  Preparation of superhydrophobic surface for PTFE/ePTFE materials by oxygen plasma treatment. 1215-1218
  
• Wenliang Cao, Dingxiu He, Xuanzi Hu:
  IT talent demand forecast and research in Dongguan based on Grey System Theory. 1219-1222
  
• Lina Zhang, Jiaqing Tu, Zhimin Wang:
  A mixed de-nosing method of digital image based on removed-noise threshold. 1223-1226
  
• Zi-ping Liu, Run-quan Gao, Guang-hui Yang:
  A design of a SmartCrown work roll profile. 1227-1229
  
• Dalu Guan, Ailong Fan:
  Power distribution network reconfiguration based on fuzzy control theory and ant colony algorithm. 1230-1232
  
• Xuejun He, Rui Chen:
  Optimal control system of coke oven collector pressure control. 1233-1236
  
• Li Zhang, Yong Zhao, Yihe Xu:
  Application of fuzzy neural network in fault diagnosis of hydraulic system. 1237-1240
  
• Guixiang Tao, Shujuan Yi:
  Research on pusher and ejector in seeder of cell rotary-plate. 1241-1244
  
• Fusheng Li, Di Cheng:
  The research on dynamic performance of 200 km/h CRH2 EMU vehicle. 1245-1251
  
• Lunwu Zeng, Runxia Song:
  Cloaking of heat flux and temperature. 1252-1255
  
• Xue Han, Feng Li:
  Optimization of motion estimation and integer transform and quantization in H.264. 1256-1259
  
• Wenhong Liu:
  A novel robust adaptive time delay estimation method. 1260-1262
  
• Rui Chen, Zhenchao Zhou:
  Intelligent fault diagnosis for analog circuits. 1263-1266
  
• Hongyun Wu, Qiuhua Rao, Xinming Chen, Yuqing Gao:
  Establishment of seabed soft sediments pressure-sinkage model. 1267-1270
  
• Yongqiang Dong, Liping Sun:
  Computer simulation and analysis of deepwater Steel Catenary Riser. 1271-1274
  
• Yong Yang, Zhengyou Liang:
  Design of province-level information system of the development and reform commission based on portal websites. 1275-1277
  
• Xinying Wu, Guangyao Ouyang, Di Tan:
  The wear analysis for cam mechanism of diesel fuel injection pump based on multibody dynamics theories. 1278-1282
  
• Ying Zhang, Ming Dong, Ling Cai, Qing-De Meng:
  The analyzing of a cascaded multilevel class-D power amplifier with the carrier-based phase-shifted modulation. 1283-1286
  
• Yaguang Chen, Shuangyuan Zhao:
  PMSM speed control simulation based on sliding mode variable structure. 1287-1290
  
• Xiaorong Gao, Xiaomei Sun, Chaoyong Peng, Jianqiang Guo:
  Transmitting circuit design for ultrasonic transducer. 1291-1293
  
• Yanbin Li, Chuan Jin, Xueliang Chen, Feng Gao, Yunfeng Shi:
  A new detection circuit design based on DDC264. 1294-1296
  
• Moli Xu, Ping Cheng, Ming Wang:
  A new model for robust Wardrop's user equilibrium under uncertainties. 1297-1300
  
• Zhijun Liu, Lianzhi Jiang:
  PWM speed control system of DC motor based on AT89S51. 1301-1303
  
• Biao Lai, Huiqin Jia:
  Design and implementation of Square-Cabin Environmental Parameters Monitoring System based on the virtual instrument. 1304-1307
  
• Huiqin Jia:
  Development of CPU module test device based on the virtual instrument. 1308-1312
  
• Xia Li, Kang Xie, Hai-ming Jiang:
  Transmission properties of guiding band in one-dimensional slow wave structures. 1313-1316
  
• Bin He, Hongzhou Zhao, Jun Ye:
  Research on the intelligence and assistant technology of the virtual maintenance system of armored vehicles transmitter-receiver. 1317-1320
  
• Xiao Luo, Limin Liu:
  A FPGA LED controller for SoC. 1321-1323
  
• Limin Liu, Xiao Luo:
  The reconfigurable IP modules and design. 1324-1327
  
• Yunfeng Shi, Chuan Jin, Feng Gao:
  The solution of ethernet based on hardware protocol stack W5300 and FPGA. 1328-1331
  
• Yunfeng Bi, Fujun Qi, Jinjia Guo, Ronger Zheng:
  The spectral image acquisition and processing system based on folded gratings spectrograph and ICCD. 1332-1335
  
• Xuebing Fan:
  Topological analysis of deployment chassis of Nomad. 1336-1339
  
• Ping Cheng, Ming Wang, Lizhi Wang, Yuming Zhang, Hui Guo:
  The ESR characters of unintentionally doped 4H-SiC with Si ion implanted. 1340-1342
  
• Qisheng Guo, Huankai Yu, Zhiming Dong, Jinghua Song, Liang Li:
  Optimization model of armored equipment inventory based on system dynamics. 1343-1346
  
• Peijiang Chen:
  Construction of test question database for electrical and electronic technology. 1347-1350
  
• Xuehua Jiang:
  Design and implementation of hotel call accounting system. 1351-1354
  
• Pei Gong, Z. Q. Zhao, L. P. Jiang, S. X. Wu, G. R. Zhang, H. B. Hao:
  Microstructure and magnetostrictive properties of as cast Fe83Ga17Tbx alloys. 1355-1358
  
• Yi Sun, Jihai-Jiang, Yu Zhou:
  Analysis and simulation of the property of oil film of the slipper in axial piston pump. 1359-1362
  
• Longying Lian, Chunyu Song:
  Research of RBAC access control model based on LDAP tree storage. 1363-1365
  
• Dandan Shi, Kexin Bi:
  Study on the effect of information-oriented DEA on technology innovation. 1366-1371
  
• Yanjun Zhang, Xianmin Bai, Jianhua Zhan, Yating Zhang:
  Multi-channel and high-reliability temperature acquisition system based on RS422 and USB bus. 1372-1376
  
• Juan Wu, Xian-Feng Liu, Li-Cheng Hu, Xu Sun:
  The grey relational analysis on various modes of transportation in China. 1377-1380
  
• Jiahua Wei, Fengxing Zou, Pengfei Liu:
  Optimal control of two-level quantum systems based on the geometrical parametrization. 1381-1384
  
• Bo Zhu, Feng-xing Zou, Jia-hua Wei:
  A novel approach to solving weapon-target assignment problem based on hybrid particle swarm optimization algorithm. 1385-1387
  
• Ying Shang, Jizheng Chu, Zhengbao Zhao:
  A novel method for packing unequal circles into a rectangular container. 1388-1391
  
• Rongli Chen, Chunyou Dong:
  The improved algorithm of D-S theory based on computer simulation. 1392-1395
  
• Min Lai, Yan Ma, Xiang Li:
  Templated electrodeposition of single-crystal ZnO nanorods. 1396-1399
  
• Yukui Wang, Wang Qi, Zhi Cai, Zhaoqi Zeng, Zhenlong Wang:
  4-axis micro ED-milling of micro 3D structures on cylindrical workpiece based on CAD/CAM commercial software. 1400-1403
  
• Zhengbao Yang, Yukui Wang, Fei Gao, Zhenlong Wang, Yangwei Wang:
  Study on the hydrodynamics and kinematics of a biomimetic fin propulsor actuated by SMA wires. 1404-1407
  
• Benbo Zhao, Wenchao Mai, Fuyu Sun:
  The control system design of methanol reforming hydrogen based on kingview and PLC. 1408-1412
  
• Guochang Lin, Huifeng Tan:
  The influence of ozone on the property of envelop materials of near space vehicle. 1413-1416
  
• Guoping Li, Ziqi Jia, Zhengfang Wang, Xiaodong Dai, Zhiheng Zhang:
  Fully atomistic molecular dynamics simulations of the mechanism of the drag reduction agent. 1417-1420
  
• Guizhong Guo, Xinhua Mao:
  Research on the milling tool monitoring system based on wavelet neural network. 1421-1423
  
• Qi Ge, He Wu, Ya-feng Gong, Jia-ping Zhang:
  Research on the failure process and mechanism of soil slope in seasonal frozen regions based on numerical simulation. 1424-1427
  
• Feng Zhan, Xiaotang Li:
  A dynamic design method based on system reverse load for CDMA EV-DO RevA Qos. 1428-1430
  
• Xuefeng Li, Shaoxian Peng:
  Tribology of poly(vinyl alcohol)-carbon nanotube composites. 1431-1434
  
• Songshan Liu, Hao Wei, Weihua Wang:
  Investigation on some key issues of regenerative damper with rotary motor for automobile suspension. 1435-1439
  
• Gang Gou, Jianping Song:
  A chip temperature-controlled technology based on the integrated-circuit CA3046. 1440-1442
  
• Dong Shao, Lei Zhou:
  Stochastic Entropy Fuzzy Comprehensive Evaluation method of financial scientific and technology investment. 1443-1446
  
• Ying Zeng, Fenlin Liu:
  Abstract interpretation-based formal description of data obfuscation. 1447-1450
  
• Zhengjun Wang:
  Optimal repair resource assignment strategy for partial failed systems. 1451-1454
  
• Qiu-guo Wang, Jin-long Zhang, Lei Zhang, Li-jia Chen, Wei Gao:
  Design of hollow-core photonic band-gap fibers for CH4 and C2H2 optical fiber sensors. 1455-1457
  
• Jun Zhang, Zhaojun Meng, Rui Chen, Changzhi Sun, Yuejun An:
  Decoupling control of PMSM based on exact linearization. 1458-1461
  
• Wensheng Xu, Jun Ma, Hongyan Chu, Hongtao Wu:
  The modeling method of curved surface based on ACIS. 1462-1465
  
• Lingjun Kong, Wensheng Xu, Jianzhong Cha, Jiaqing Yu, Nan Li:
  A resource integration platform for manufacturing grid based on SOOA. 1466-1469
  
• Kechao Wang, Zongfu Jia, Ming Kui Zong, Jingwei Yu:
  Research of network storage system based on erasure code. 1470-1474
  
• Yue Feng, Yang Zhao:
  Research on grinding spindle frequency distributed control system. 1475-1477
  
• Yujie Liu, Yunkai Zhou, Hongbing Xiao:
  A lossless acoustic logging while drill compression scheme based on differential prediction. 1478-1481
  
• Lina Jiang:
  Nonlinear perturbation solution of Duffing equation and the application in control system. 1482-1485
  
• Shelong Kang:
  Analysis of environmental effects of deep groundwater exploitation in east-central plains of Hebei province. 1486-1490
  
• Shelong Kang:
  Impacts of human activities and climatic change on water resource in Hebei province. 1491-1494
  
• Chuan-lian Ma:
  Phase rotation Maximum Transmit Diversity code. 1495-1498
  
• Ming Dong Ling Cai, Qingde Meng, SunLin Yang:
  A cascaded multilevel class-D power amplifier output harmonic. 1499-1502
  
• Qiang Fu, Chunlian Lu, Yuguang Man, Qiuhan Zhang, Wei Zheng, Chengwei Huang, Bing Xu, Zhenghai Li:
  Anticorona materials and structure for stator coils of high voltage generators. 1503-1506
  
• Guohong Liu, Rongjun Tang, Chuanzhi Chen, Peng Peng:
  Synthesis, characterization and cataluminescence properties of three aerogels. 1507-1510
  
• Mingyu Xia, Donghua Cui, Junhui Wei, Zhen Liu:
  A quick target recognition technology. 1511-1514
  
• Guiyan Pei, Donghua Cui, Junjie Li, Mingyu Xia:
  The research on multi-target matching. 1515-1518
  
• Hongsheng Yu, Xiusheng Liu:
  Structure similarity image quality assessment based on visual perception. 1519-1522
  
• Weiping Jiang, Peng Peng, Yuzhao Liu, Xingang Wang, Xin Wang:
  Study on the preparation, characterization and antibacterial activity of complex for gadolinium iodide with thiourea. 1523-1526
  
• Tianli Li, Gang Xu, Licun Fang, Kemin Zhu:
  Double-fuzzification fuzzy control and its application in process control. 1527-1529
  
• Li Peng, Jianbo Xu, Wei Liang:
  Inter-cluster route algorithm based on the gateway for wireless sensor networks. 1530-1533
  
• Dewei Dong, Yunhui Yan, Zhan Wang:
  Application of gray correlative model for surface quality evaluation of strip steel based on the variation coefficient method. 1534-1537
  
• Xiaohui Ma, Junya Yan:
  An improved parallel banker's algorithm based on Petri net. 1538-1541
  
• Qiang Huang, Qiuping Huang, Jun Li:
  State recognition system of mechanical equipment based on the VS theory and HSMM. 1542-1544
  
• Kaiyun Lv, Shilin Zou:
  Research on mine laneway 3D modeling. 1545-1548
  
• Jun-suo Qu:
  A time synchronization mechanism for real-time EPON. 1549-1551
  
• Zongwen Bai, Weihu Zhang, Meili Zhou, Jie Bai:
  Algorithm designed for image inpainting based on decomposition and fractal. 1552-1555
  
• Xiaoyu Wang, Linghui Yu, Song Xie:
  Research on micro-electro-mechanical system computer aided design. 1556-1559
  
• Zhao Hui, Zhu Hong Yuan, Zhou Yi Long, Wang Qing Wen:
  Reasearch of Wood Plastic Composites application based on Fused Deposition Modeling technology. 1560-1562
  
• Xintong Zhao, Chengjun Jin, Jianyu Li, Xiaodong Lu:
  Simulation analysis of integration shear weighing plate based on ANSYS. 1563-1566
  
• Defan Zhou, Xiaodong Yu, Xiuli Meng, Chunli Gao, Zhixin Qiu, Hongjun Xiang, Changqing Yang, Yinfeng Liu, Shuyan Zhao, Yan Ni, Wenwu Guo:
  Theoretical research on bending deflection of ram in DVT250 numerical control double-column lathe. 1567-1570
  
• Junshan Si, Xianjiang Shi, Xiaodong Yu, Chong Li, Hong Shi:
  Research on reliability and maintainability of mechanical equipment. 1571-1573
  
• Xiaodong Yu, Xiuli Meng, Defan Zhou, Yonghai Li, Bo Wu, Chunli Gao, Yanqin Zhang, Junfeng Wang, Xianzhu Sun, Yan Ni, Shuyan Zhao, Hui Jiang, Weiming Nie, Changqing Yang:
  Numerical simulation of the static interference fit for the spindle and chuck of high speed horizontal lathe. 1574-1577
  
• Shi Wu, Dongkai Jia, Yuntong Jia, Ke Wu:
  Structural design and testing study of truck muffler. 1578-1581
  
• Yongjun Zhang, Yang Li, Qingjian Dong:
  The research of the accuracy with gear measuring center based on finite element analysis. 1582-1585
  
• Guihua Han, Bingwei Gao, Junpeng Shao, Di Wu, Xiaodong Yu, Zhimin Shi:
  Structural analysis and optimization on crossbeam of heavy NC gantry moving boring & milling machine. 1586-1589
  
• Dezhong Ma, Yongqing Jang, Zhen Zhou, Tonghui Zhao, Dawei Lin:
  Grey relation analysis on fuzzy fault tree of disk brake. 1590-1594
  
• Hong-xin Zhang, Jian Zhang, Li-ying Wu, Dong Wang:
  Wavefront aberration correction using circulation feedback control based on image boundary definition. 1595-1598
  
• Fang Wang, Zhilong Liu, Zhongjian Li, Yuejun Liu, Zuomin Wang, Maoyu Zheng:
  Performance analysis of seasonal soil heat storage air conditioning system in solar ground coupled heat pump. 1599-1602
  
• Peng Wang, Dongbin Li, Shan Cong, Chao Liang:
  Development of automatic control system for supplying cold water based on PLC and configuration software. 1603-1606
  
• Tiequn Duan, Qingjian Dong, Zhenqi Yang, Yang Li:
  Finite element analysis of temperature field on capillary rheometer. 1607-1610
  
• Zhenbo Wang, Hongshan Yuan, Xinyan Liu, Zhenning Zhao:
  Parameter optimization of cutting process based on MATLAB. 1611-1614
  
• Tao Chen, Mingjun Zhang, Xianli Liu, Yuhui Shen:
  Predicting residual stress characteristics based on BP artificial neural network in precision hard turning. 1615-1618
  
• Li Xu, Shubo Liu:
  Grinding engineering ceramics research. 1619-1622
  
• Tiequn Duan, Lei Xu, Zhenqi Yang:
  Design and simulation of high-pressure capillary rheometer. 1623-1626
  
• Tiequn Duan, Da Zhang, Zhenqi Yang, Dan Yu:
  Interpolation algorithm and simulation on automatic saddle-shaped welding machine of heavy pressure vessels. 1627-1630
  
• Yaonan Cheng, Liquan Wang, Zhengjia Li, Jun Gao, Caixu Yue, Yuhui Shen:
  Research on groove optimization for milling insert based on finite element analysis. 1631-1634
  
• Juntao Jing, Hong Zhao, Yunfeng Liu, Xuanqi Li, Zhonglu Liu:
  Tool path planning in finish-milling process for integrally-shrouded impeller channels with rings. 1635-1638
  
• Dongbin Li, Peng Wang, Chao Liang, Shan Cong, Ying Li, Ting Chen:
  Development of automatic control system for finishing of precise flat steel. 1639-1642
  
• Donghua Li, Xibin Wei, Xinwei Zhou:
  Analysis on displacement and stress of a new wind power generator stator. 1643-1645
  
• Xibin Wei, Donghua Li, Cong Wang, Xing Liu:
  Structure dynamics analysis of multistage submarine missile shell. 1646-1649
  
• Yandong Yu, Peng Jiang, Yuan Zhuang, Huiyan Ning:
  Finite element analysis of superplastic blow forming of fine-grained magnesium alloy sheet. 1650-1653
  
• Yandong Yu, Chao Li, Juan Feng:
  Finite element simulation of SPF/DB process for ZK60 magnesium alloy corrugated part. 1654-1657
  
• Xiaojing Wang, Jianying Li, Junpeng Shao:
  Research on the key technique of continuous rotary electro-hydraulic servo motor. 1658-1661
  
• Ming Xu:
  Study of macromolecular compound anstatic agent. 1662-1665
  
• Feng Chen, Giancarlo Genta, Guang Zhao:
  Dynamic modelling of wheeled planetary rovers. 1667-1671
  
• Guang Zhao, Jian Yu, Fu Tian, Yan Liu, Xingang Guo, Yanfeng Duan:
  Dynamic simulations of API000 nuclear main pump rotor system. 1672-1674
  
• Yang Yao, Hongjie Wang, Ruzhi Gong, Xianzhu Wei, Wanjiang Liu:
  Numerical study of francis turbine flow field under small opening condition. 1675-1678
  
• Hongyan Wang, Xiaobiao Shan, Tao Xie, Muwen Fang:
  Analyses of impedance matching for piezoelectric energy harvester with a resistive circuit. 1679-1683
  
• Wangkai, Xiangdong Mao, Jie Du:
  Instrument reach for peeping at the bore of deep pipe. 1684-1686
  
• Chunting Ma, Liqing Fang, Jiuhe Ma, Jie Du:
  Design of video system for detecting the bottom of deep pipe. 1687-1689
  
• Xiaobo Lu, Xiangdong Mao, Jie Du:
  Design of straightness tester for deep pipe. 1690-1692
  
• Yilin Zhou, Hongda Liu, Wenchao Lv:
  The effects of fibers on the electrical contacts. 1693-1697
  
• Xiaozhong Yang, Lifei Wu:
  A new kind of effective of algorithms for solving the option pricing model with transaction costs. 1698-1701
  
• Yu Liu, Yanyan Zhao, Xinshe Zhang:
  Study statistical properties of Raman Cross-talk with walkoff in fiber communication systems. 1702-1704
  
• Zonggeng Zhao, Dingshi Sun, Yanan Wang:
  Application of credal network on evaluating emergency capacity. 1705-1707
  
• Xiaolan Zhao, Huailin Ruan, Jiren Xu, Jiasong Cheng, Jihai Niu:
  Research on sound intensity probe whose frequency band can be adjusted. 1708-1711
  
• Jun-suo Qu:
  Design of frame structure and MAC protocol for real-time EPON. 1712-1714
  
• Jing Long, Jianbo Xu, Wei Liang:
  An FPGA-based distributed IP watermarking method. 1715-1717
  
• Hongchi Liu, Shutian Zhang, Xiaoxin Wang:
  Design of VME bus interface board based on FPGA for converter control. 1718-1722
  
• Qiu-Yun Zheng, Tao Li:
  Design and realization of video streaming real-time transmission system based on IPTV terminal. 1723-1726
  
• Zhi-hua Ding, Qiang Huang, Dai Hong-mei:
  Structural design and damping characteristics modeling of new recycling vibrational energy hydraulic vibration damper. 1727-1730
  
• Bo Chen, Donghong Ji:
  Chinese semantic parsing based on dependency graph and feature structure. 1731-1734
  
• Jingshi Liu, Lihua Lu, Yazhou Sun, Jiaxuan Chen, Yingchun Liang, Lei Huang:
  Analysis of thermal stability of center of mass of gas-floated gyroscope. 1735-1738
  
• Yongqiang Zhang, Yukun Liu, Hongbin Gao:
  Study of a scenic spot monitoring system based on RFID and multi-sensor information fusion technology. 1739-1742
  
• Weiping Jiang, Xingang Wang, Zhongping Yang, Peng Peng, Yuan Lu, Hongchun Ren:
  The present situation and application of Biosensor. 1743-1746
  
• Wanjun Yan, Shiyun Zhou, Quan Xie, Chunhong Zhang, Zhongzheng Zhang:
  First principle investigation of CrSi2 with doping V. 1747-1749
  
• Zhe Yin, Yunfei Guo, Maosheng Lai:
  Calculations of amounts of joint reserve of talents in human resources systems. 1750-1753
  
• Qizhi Huang, Tianshi Han, Kai Yin:
  Novel method for processing of the pressure waveform based on Wavelet analysis. 1754-1756
  
• Liangwen Wang, Xinjie Wang, Xuedong Chen, Xiaohui Zhang, Weigang Tang, Duanqin Zhang:
  Mechanism configuration design of multi-legged walking robots based on hand-foot-integrated function. 1757-1761
  
• Xinjie Wang, Xianqun Zeng, Yuxiao Zhang, Liangwen Wang, Bo Wei:
  Control system design for multi-legged robot with hand-fused foot. 1762-1764
  
• Kai Yin, Qizhi Huang, Huijun Yang:
  Research on optimization of transportation-loading. 1765-1768
  
• Xue-Wei Bai, Ping Zhao, Yongkui Li, Juan Liu:
  Modal analysis of a type of square baler's framework. 1769-1772
  
• Xiao-li Hao, Fang Chen, Ying-bo Zhao, Hong-zhe Tian:
  Determination of five flavonoids in honeys by HPLC-ESI-MS/MS. 1773-1776
  
• Liangwen Liu, Jianxiong Ye:
  An approach to scheduling of flexible manufacturing system. 1777-1779
  
• Peng Peng, Chuanzhi Chen, Shanmao Li, Weiping Jiang, Guohong Liu, Xin Wang:
  Coupling process of sphalerite concentrate leaching in FeCl3-HCl and tetrachloroethylene extracting of sulfur. 1780-1783
  
• Xiao-hong Xu, Li-ping Jia, Xiang-xia Li, Jun-jian Kang:
  An experimental project dedicated to pumping efficiency optimization by choosing specific cylindrical lens based on green optical-contact laser. 1784-1786
  
• Mingde Gong, Qiusheng Chang:
  Position controller based on state observer for 6-DOF parallel teleoperation manipulator. 1787-1790
  
• Tianxu Wang, Mingde Gong:
  Design electronic control unit of blend brake system for heavy vehicle. 1791-1794
  
• Benhua Zhang, Chenghua Li, Shiming Sun, Lu Gan:
  Design on a unipolar and unidirectional stepper motor circuit. 1795-1797
  
• Fengqin Zhao, Yandeng Guo, Shipeng Lai:
  Developed and test study on the subsoiler. 1798-1801
  
• Hongguang Cui, Wentao Ren, Fuling Zhang:
  Dynamic testing for the seed tape tensions of the rice seed tape twisting machine. 1802-1805
  
• Li-jun Chen, Xue-wei Bai, Jun-ling Wang:
  Optimization and simulation of crank-rocker mechanism based on Excel. 1806-1809
  
• Yanan Wang, Qizong Wu, Chunsheng Cui:
  Study on Shanghai stock market with ACD model based on MCMC. 1810-1813
  
• Feijiang Huang, Xiaochun Lu, Jun Yang, Qingxiao Shan, Jianyun Chen, Yongbin Zhou:
  Analysis of GEO intersatellite laser time transfer and link performance. 1814-1817
  
• Ruili Wang, Yulong Zhang, Yi Huang, Fenglan Wei, Xuewei Bai, E. Liu:
  Effect of burying the straw deeply and plastic mulching on soil water and yield of spring-sown maize. 1818-1820
  
• Cuihong Liu, Wentao Ren, Junming Hou, Benhua Zhang, Ling Tong:
  Study on dynamic response of the experiment to potted crop's water consumption detection system. 1821-1824
  
• Cuihong Liu, Wentao Ren, Benhua Zhang, Changyi Lv:
  The application of soil temperature measurement by LM35 temperature sensors. 1825-1828
  
• Liping Sun, Rong Deng, Yuan Yuan, Huiqiu Deng:
  Preparation of titanium oxides films by CVD in O2-N2 atmosphere. 1829-1831
  
• JiaWei Zhang, YunXia Liu:
  3D Model retrieval technology based on 3D reconstruction. 1832-1835
  
• Xingang Wang, Zhongping Yang, Weiping Jiang, Peng Peng, Hongchun Ren, Yuzhao Liu, Yuan Lu, Ruizhong Zhuang:
  The present situation and development of machinery's integration. 1836-1839
  
• Pingli Wu, Guoguang Gao:
  An optimization control method of waste incinerator for power generation. 1840-1844
  
• Pingli Wu, Guoguang Gao:
  Research on ECS control scheme of waste incineration based power plant. 1845-1848
  
• Jiansheng Hao, Qizhi Huang, Shudong Li:
  Application of equipment maintenance vehicles based on entropy multi-objective decision. 1849-1851
  
• Qing-mei Meng, Ai-lian Chen:
  Artificial emotional interaction model based on EFSM. 1852-1855
  
• Yongling Fu, Bin Yang, Haitao Qi, Ye Zhang:
  Optimization of the control strategy for EHA-VPVM system. 1856-1859
  
• Kuihua Wu, Jian Wang, Xinsheng Niu, Kuizhong Wu:
  Analysis on generating mechanism and capacity calculation of reactive power compensation in 220kV substation. 1860-1863
  
• Mingwei Sheng, Weishan Chen, Junkao Liu, Shengjun Shi:
  A circular bend mode piezoelectric micro-droplet ejection generator for spatial lubrication. 1864-1867
  
• Qunhao Jin, Zichao Yan, Xuewang Liu, Shuchao Ma, Taiyu Guo, Siyou Tong:
  Qt programming to realize teaching simulation demonstration of exploration seismology. 1868-1871
  
• Ling Pei, Jingkui Ruan, Feng Li, Qing Lu, Haisheng Wang, Longzhou Zhang:
  A SCM experiment of engine assembly by WITNESS simulating. 1872-1875
  
• Lijing Wang, Liping Shi:
  Simulation of the self-sensing actuators based on multi-piezoelectric effects of piezoelectric crystal. 1876-1879
  
• Xiangyan Zhang, Chunhua Jin:
  The pricing model construction of reverse supply chain based on game theory. 1880-1883
  
• Shilin Wu, Feng Zhu, Yingming Hao:
  Semantic segmentation using regions in natural scenes. 1884-1887
  
• Manlin Long, Guanghua Li, Shuangqiao Chen, Yongling Fu:
  ADR algorithm applied in electro-hydraulic servo system. 1888-1891
  
• Xiuhua Men, Yuzhen Ma, Haiyan Shao:
  A new method for the analysis of temperature-dependent resistances and inductances of multiconductor cable. 1892-1896
  
• Juan Hu, Jianlin Li, Dong Hui:
  Research on Bi-directional converter for lithium battery energy storage system. 1897-1900
  
• Zhenwei Han, Kefei Song:
  Design of thermostat system based on Proteus simulation software. 1901-1904
  
• Haijun Zhu, Yanan Song, Qian Zhong, Tao Zhang, Xigui Hu:
  Net utility maximization based scheduling model. 1905-1908
  
• Yelin Hu, Xiaowang Guo, Jianyong Zhu:
  Research on RFID-based monitoring platform for wireless sensor networks. 1909-1912
  
• Baiping Li, Xiaoqin Zhang:
  Rsearch of development in wireless sensor network routing protocols based on NS2. 1913-1916
  
• Zhiqiang Zeng, Pingping Huang:
  Palmprint recognition using Gabor feature-based two-directional two-dimensional linear discriminant analysis. 1917-1921
  
• Shaowei Li, Xinqing Zhuang:
  Embedded based radar image acquisition and compression. 1922-1926
  
• Yukun Wang, Bibo Lu:
  The path algorithm coal mine's emergency rescue. 1927-1931
  
• Yue Chen:
  The comprehensive ranking evaluation of flood disaster based on grey-cloud whitening-weight function. 1932-1934
  
• Li Zhang, Yulong Lou:
  Identifying the mechanism of toxic action of selected compounds by artificial neural networks. 1935-1938
  
• Xiaohua Lai, Jiangyuan Le:
  Power system simulation platform based on CORBA technology. 1939-1941
  
• Chunfeng Jiang, Yulan Zhao:
  Research of task decomposition based on multi-agent cooperation. 1942-1944
  
• Hui Zhang, Zhihui Feng, Rui Gao:
  Research and development of intelligent decision system for highway maintenance based on GIS. 1945-1948
  
• Bo Song, Huimin Feng, Chuanguang Ding:
  Analysis of voltage source control characteristics of clearance control magnetic dynamic absorber. 1949-1953
  
• Subo Tian, Donglei Xu:
  Current status of grafting robot for vegetable. 1954-1957
  
• Shu-qin Sun, Zhe Zhang, Jim Lin, Ying-ji Wang:
  The technology of normalized digital orthogonal detection and its application. 1958-1963
  
• Huimin Yang, Lihai Wang, Li Li:
  Frequency equation of axisymmetric guided waves in logs. 1964-1967
  
• Bingyuan Han, Jiangwei Chu:
  Performance monitoring and acquisition system design of gasoline engines based on oxygen enriched combustion. 1968-1973
  
• Shaoyan Li, Jiangwei Chu, Bingyuan Han, Yan Wang, Xinyue Li:
  The torque measurement method and characteristics analysis based on magneto-elasticity. 1974-1977
  
• Bing Li, Jiangwei Chu:
  The simulation analysis of the centroid offset effects on braking performance. 1978-1981
  
• Zhiqiang Duan, Xiangyin Feng, Jizheng Han, Caihua Fei:
  The research of the technology of controlling skin pass mill elongation rate. 1982-1985
  
• Futian Sun, Dandan Sun:
  Evaluation on agricultural relative efficiency in different areas of China. 1986-1990
  
• Yue Xu, Zenghui Wang, Dongyan Wang:
  Background segmentation of corn seedling stage base on the greenness method. 1991-1994
  
• Bao-Quan Zhu, Wen-jie Zhai:
  Wear analysis of UHMWPE acetabular cup in standard gait. 1995-1998
  
• Xuemei Qin, Yehai Lin, Baoshan Shi:
  Electrohydraulic servo control of vehicle yaw rate angular velocity. 1999-2003
  
• Yingwei Ren, Shourong Wu:
  Analysis of heavy trucks' effect on freeway traffic safety. 2004-2007
  
• Yuancheng He, Zhen Hong, Lin Yuan, Songtao Wu, Ziqiu Zheng:
  The theatrical calculating formulas of BFT type flexible driving with multichannel engaging. 2008-2014
  
• Haiyan Chen, Yue Ma:
  Designed on full-closed loop control system of gear measuring center. 2015-2018
  
• Jinxia Huang, Junfa Wang:
  The research of fuzzy self-tuning PID in Chinese traditional herbal harvester with gripping-belt speed. 2019-2024
  
• Mao Wang, Yongheng Yue, Ming Yan:
  Analysis and design for bilinear discrete systems subject to input saturation. 2025-2028
  
• Junjie Li, Luwei Xu, Guiyan Pei:
  A method to judge taper-taper intersection. 2029-2032
  
• Minghua Chen, Jinghua Yin, Yu Feng, Xiaoxu Liu, Guang Li:
  Effect of content on dielectric performance of Barium titanate/polyimide films. 2033-2036
  
• Xiaoxu Liu, Jinghua Yin, Minghua Chen, Yu Feng, Guang Li:
  Effect of content on dielectric performance of polyimide / TiO2 hybrid films. 2037-2039
  
• Lifu Zhang, Dongfang Lu:
  A new estimation method of the forestry inventory parameter based on three-dimension laser scan technology. 2040-2043
  
• Long-Jye Sheu, Wei-Tai Weng, Horng-Shing Chiou, Shah-Rong Lee:
  The onset of convection in a viscoelastic nanofluid layer. 2044-2047
  
• Lifu Zhang, Dongfang Lu, Liwen Cao:
  Study on application of 3D laser scanning technology in estimation of the standing tree parameter. 2048-2051
  
• Yi-Bo Li, Jin-Ying Liu:
  Review on integrated health management for aerospace plane. 2052-2055
  
• Senyue Zhang, Shanshan Bei, Yibo Li, Xiaoling Shen:
  Gait identification method based on closed area feature of lower limbs. 2056-2059
  
• Chuan-dong Xu, Xi-Yu Xu, Shuangbao Yang:
  Bias analysis on return signal simulator of radar altimeter. 2060-2064
  
• Yibo Li, Cheng Qiang Liu:
  An indoor airship autopilot design scheme. 2065-2068
  
• Ning Han, Yuguang Han, Chunhui Wang:
  Comparative analysis on a vehicle's speed control systems stabilty based on fuzz rules and PID method. 2069-2072
  
• Nan Xu, Dang Lu, Shenhai Ran:
  A predicted tire model for combined tire cornering and braking shear forces based on the slip direction. 2073-2080
  
• Peng Zhang, Guang Jin, Xing Zhong, Yuan Zhang, Ying-Chun Qi, Peng Jie:
  Surface shape optimization for the space membrane reflector. 2081-2084
  
• Zhang Yuan, Zhong Xing, Jin Guang:
  Study on supper resolution reconstruction based on staggered arrays. 2085-2088
  
• An Cuf, Zihui Liu, Qingyang Zeng, Qiang Yang:
  The layout and fatigue life analysis of welding spots for the cab body in white of a commercial vehicle. 2089-2093
  
• Yanjie Ren, Zailin Piao:
  Theoretical research and simulation of series compensation technology of distribution line. 2094-2097
  
• Ruili Wang, Yulong Zhang, Yi Huang, Fenglan Wei, Xuewei Bai, E. Liu:
  Mechanization of deep tillage and mulching to improve soil water content and spring maize yield. 2098-2101
  
• Guanglan Xia, Yan Ma, Xiaoping Hu, Feng Yu, Ping Feng:
  The mathematical model and simulation of spatial profile curve for stair handrail elbow. 2102-2105
  
• Niancheng Guo, Wenku Shi, Guangming Wu, Wei Liu, Chunguang Hao:
  Experimental investigation of vibration and transmitted power for vehicle rear axle noise research. 2106-2108
  
• Guangming Wu, Wenku Shi, Zhiyong Chen, Jianghua Fu, Niancheng Guo, Suojun Hou:
  Finite element modal analysis and test modal analysis of the control cab. 2109-2111
  
• Yuchen Zang, Wenku Shi, Xiang Song:
  Optimization of powerplant mounting system and software development. 2112-2115
  
• Chien-Feng Wu, Chcng-Hsicn Chen, Mui-Home Chen, Cheng-Wenc Chen:
  Application of advnced process control on mixed-product chemical mechanical polishing process. 2116-2119
  
• Wensi Liu, Chenhua Zhong, Zhiqing Yang, Xiaojun Zhu:
  Validate fireproof effect of designed structure by temperature field simulation and calculation. 2120-2123
  
• Cui Zhang, Xinhui Liu, Zhan Wang, Qiang Shi:
  Analysis of the regenerative brake system parameters for concrete mixing truck basded on AMESim. 2124-2127
  
• Cui Zhang, Xiaobin Wang, Zhigang Wang:
  Design of the control system for hydraulic experimental bench based on LabVIEW. 2128-2130
  
• Jiqiang Zhai, Keqi Wang:
  Design and implementation of dynamic virtual network. 2131-2134
  
• Siqing Tian, Liang Chen, Junwei Yang, Jinghui Hao:
  A novel algorithm of maneuvering target tracking based on AIMM-CKF. 2135-2138
  
• Yanjie Ren, Zailin Piao:
  Effect of parallel compensation on series compensation in long distance distribution line. 2139-2142
  
• Zhenhai Gao, Tao Wu:
  Soft sensor of vehicle state based on UKF and vehicle dynamics. 2143-2147
  
• Zhigang Wang, Cui Zhang, Chunhong Wu:
  3G Technology in the engineering disciplines of higher vocational education. 2148-2151
  
• Suojun Hou, Wenku Shi, Shaohua Wang, Xuejing Wang:
  Buiding model and dynamic characteristic analysis for magnetorheological fluid engine mount. 2152-2154
  
• Jian Zhao, Litong Guo, Bing Zhu, Wenjie Duan:
  Modeling and control of automotive antilock brake systems through PI and neural network arithmetic. 2155-2158
  
• Ran Yan, Yu Ma, Heping Tan, Jing Ma:
  Temperature field reconstruction using artificial neural network. 2159-2163
  
• Lidong Yang, Yu Gu:
  Design and realization of DICOM/HL7 gateway in PACS. 2164-2167
  
• Huaizhou Li, Xiaolin Zhang, Yue Wang:
  Study on CMOS operational transductance amplifiers. 2168-2171
  
• Monan Wang, Hongshu Guo, Zhang Meng:
  The study of the fixation for femoral neck fracture based on finite element method. 2172-2174
  
• Monan Wang, Xiang Chi, Hongjing Wang:
  Design and research of simulated surgical instruments for medical training system. 2175-2178
  
• Yuerong Zhao:
  Optimal operation of panel furniture reconfigurable manufacturing system based on TCPN and GA. 2179-2182
  
• Chao Shi, Fangtao Li, Yubin Zhou, Han Sun:
  Research on mistake proofing technology for airbag flexible assembly line based on barcode and database. 2183-2186
  
• LinHai Cui:
  Design of a high precision bandgap voltage reference. 2187-2190
  
• Yaojun Shi, Naiqun Wu:
  Research on stress load of joints in handling the work based on ergonomics. 2191-2193
  
• Naiqun Wu, Yaojun Shi:
  Research on the digitized models of automobile hubs based on computer simulation. 2194-2196
  
• Jin-Shuo Mei, Chang Shu, Jing-Hua Yin:
  Molecular dynamics simulation effect of temperature on binding energies of polyimide-nano a-Al2O3. 2197-2199
  
• Haijun Liu, Xibin Wei, Xing-zhi Peng, Ben-li Wang:
  Numerical simulation on effect of water depth to the hydrodynamic characteristics of the cylinder out of the tube. 2200-2203
  
• Dengju Yao, Jing Yang, Xiaojuan Zhan:
  Predicting breast cancer survivability using random forest and multivariate adaptive regression splines. 2204-2207
  
• Guangping Hao, Fanzhu Meng, Hongzhe Li, Zhihong Wang, Zhaonan Zhong:
  The design of cable-climbing robot. 2208-2211
  
• Chang Shu, Jin-Shuo Mei, Jing-Hua Yin:
  Speech synthesis based on AMR-WB algorithm. 2212-2214
  
• Jin-wei Yu:
  The program design for the network security authentication based on the USB Key technology. 2215-2218
  
• Mingru Zeng, Liang Liu, Xin Qian, Wentang You:
  Surface fitting compensation research of diffusible silicon pressure transducer. 2219-2221
  
• Zhen Wang, Wenchang Yu, Liqian Wang:
  Energy saving mechanism based on double-way polling DBA algorithm and ONU sleep mode for EPON. 2222-2225
  
• Huibing Gan, Guang Ren, Jundong Zhang:
  A novel marine engine room monitoring and alarm system integrated simulation. 2226-2229
  
• Guang Dong, Guang Cai Cui:
  Research for hybrid genetic algorithms on optimization of cutting linear stock. 2230-2233
  
• Xiao Luo, Hui Zhang, Qingsheng Luo, Cai Gao:
  Characteristic analysis and sample modeling of cave depot target. 2234-2237
  
• Wenhui Mo:
  Reliability calculation based on sensitivity analysis. 2238-2241
  
• Wenjun Ma, Yingchun Ding:
  A system of refractive index detection based on microinterferometric backscatter. 2242-2245
  
• Xiangqian Xu, Haobin Zhou, Mao Li:
  Research on intelligent frequency conversion control system of pumping unit with auto-adapted function. 2246-2248
  
• Qiliang Wang, Jianqing Liu, Ping Huang:
  Study on the design and experiment of a magnetic controlled wireless capsule endoscopy. 2249-2251
  
• Yanping Yao, Hongyan Zhang, Zheng Geng:
  Wireless charger prototype based on strong coupled magnetic resonance. 2252-2254
  
• Gang Han, Zheng Geng:
  The application of FPGA-based reconfigurable computing technology in Digital Light Processing systems. 2255-2258
  
• Juan Xu, Xuesong Zhu:
  A improved virtual circuit switching technology based on concurrent processing mode. 2259-2262
  
• Hui Li, Xiaohao Xu, Xinglong Wang:
  Research on boundary extraction and fitting analysis for convective clouds based on rerouting strategy. 2263-2266
  
• Cui Chun Sheng, Ma Tie Hua:
  The research of temperature compensation technology of high-temperature pressure sensor. 2267-2270
  
• Haifeng Peng, Erbao Dong, Shiwu Zhang, Jie Yang:
  Research on flexible honeycomb structure design for morphing aircraft. 2271-2274
  
• Yunbo Kong, Xinxi Feng, Chuanguo Lu:
  Target tracking algorithm based on improved Gaussian mixture particle filter. 2275-2278
  
• Weiwei Xu, Hongbin Liu, Yujun Xue, Jishun Li:
  Strength analysis for pre-stressed bolted joints of turntable bearings. 2279-2282
  
• Bo Yin, Yonglei Xing, Lei Wang, Zhiqiang Wei:
  Research and design of an emergency command system based on mobile devices. 2283-2286
  
• Zhiqiang Wei, Kaiyuan Shi, Dongning Jia:
  A conceptual model for preventing web bypass vulnerabilities. 2287-2290
  
• Hongping Hu, Yanping Bai:
  A kind of license plate location based on mathematical morphology and edge detection. 2291-2294
  
• Rong Cheng, Yanping Bai:
  An efficient algorithm for Chinese license plate location. 2295-2297
  
• Xiaowang Guo, Jianyong Zhu:
  Analysis and design of energy-oriented security protocols for Wireless Sensor Networks. 2298-2301
  
• Liya Yao:
  Research on brake disk modal characteristic of disk brake. 2302-2305
  
• Lei Gong, Lu Tian, Fulian Zhang:
  Application information flow non-interference transmission model. 2306-2309
  
• Liang Wang, Chen Wang:
  A DRM system for mobile digital journals based on OMA DRM model. 2310-2313
  
• Liang Wang, Chen Wang:
  An improved DRM authentication approach for mobile journals publishing. 2314-2317
  
• HengHui Sun, Minzhou Luo, Wei Lu, Xiang Dong:
  Virtual link-lengths approximating method for forward kinematics of multiple motion-coupled linkage mechanism. 2318-2323
  
• Jizhong Liu, Baolei Wang, Liangbo Li, Hua Zhang:
  Design of wireless drive and control system for capsule micro-robot. 2324-2327
  
• Bilan Lin, Yuye Xu:
  Electrochemical corrosion behavior of HRB500 steel bar in Simulated Concrete Pore solutions. 2328-2332
  
• Jian Han, Liping Wang, Ningbo Cheng, Haitong Wang:
  Thermal error modeling of machine tool based on fuzzy c-means cluster analysis. 2333-2336
  
• Lei Zhang, En'guo Dong, Yanyun Xing:
  Steering trapezoid mechanism design based on Monte Carlo method. 2337-2339
  
• En'guo Dong, Lei Zhang, Zhiwei Guan:
  Passenger recognition system based on body pressure distribution information. 2340-2343
  
• Qing Xue, Wenchao Xu, Yonghong Liu, Changwei Zheng:
  The realization of learning of perceptual model. 2344-2346
  
• Weidong Wu, Wenhe Liao, Yu Guo:
  Research of top-down automatic assembling design method based on linkage. 2347-2350
  
• Yun Zhang, Yi Chen:
  The design and implementation of a workflow system for enterprise project management. 2351-2354
  
• Xiaodong Yu, Jingbo Shao, Hongbin Dong:
  On evolutionary strategy based on hybrid crossover operators. 2355-2358
  
• Xiao-fang Shao:
  A simplified directional curve inference method. 2359-2361
  
• Jianing He, Wei Zhang, Rong Tan, Qiang Li, Yong Gao:
  Modeling and simulation about the double-circular-arc modified cycloid epicyclical gear train based on UG. 2362-2365
  
• Qiujin Zhang, Hongxing Liu:
  Research on the performance optimization of web server by software realization based cluster system. 2366-2368
  
• Wen-Long Yan, Li Jia, Hai-Ning Cui, Kaj Pischow:
  Observation and analysis of micro pizza defects in organosilicon coatings of industrial manufacture. 2369-2372
  
• Peiliang Qin, Kangmin Zhong:
  Clamping device based on lever-two-step orthogonal toggle force-amplifying mechanism driven by pneumatic muscle. 2373-2376
  
• Yang Long:
  An approach to identify magnettizing inrush currents and its simulation. 2377-2380
  
• Lizhi Zhang, Tao Wang, Huadong Sun, Long Yang, Jinzhao Ma, Lei Zhou:
  A rate control scheme for three-dimensional wavelet-based video coders. 2381-2384
  
• Qing Xue, Tao Hu, Bowei Cao:
  Attribute reduction algorithm of rough set fused with ant colony algorithm. 2385-2387
  
• Desen Yang, Xiaoxia Guo, Shengguo Shi, Jianan Ma:
  The investigation on the selection of measuring distance of acoustical holography. 2388-2391
  
• Jialian Shi, Leigang Liu:
  Extraction and analysis of high-speed wires finishing mill group rolling bearings weak breakdown signal. 2392-2395
  
• Fei Sun, He Hua Ju, Ping Yuan Cui:
  A new 12 DOF biped robot's mechanical design and kinematic analysis. 2396-2400
  
• Lianyuan Cheng, Wenzhi Liu, Gang Zong:
  Research on the accessibility model in transportation. 2401-2403
  
• Zhi-Jian Gou:
  The simulation of harmonic vibration response based on the rigid and flexible boom system of the ttruck-mounted concrete pump. 2404-2407
  
• Dan-dan Xu, Li-wen Wang, Zhi-wei Xing:
  Numerical simulation of the collection efficiency on aircraft ground icing. 2408-2411
  
• Meiyang Zuo, Hui Guo:
  Integrative simulation and analysis of induction motor and control system. 2412-2414
  
• Zuzhi Tian, Youfu Hou, Nannan Wang:
  Temperature field of the instrument for measuring the yield stress of magnetorheological fluid. 2415-2418
  
• Qing Xue, Xiaoming Ren, Changwei Zheng, Yonghong Liu:
  Research of differenced driving behavior modeling and simulation. 2419-2422
  
• Yongfu Tang, Lin Meng, Hailong Li, Feng Liu:
  Dual-band dual-beam relativistic backward wave oscillator with different inner and outer slow-wave structure periods. 2423-2426
  
• Dai Ting, Zhang Miao, Zhang De Xian:
  On the intelligent detection of insects in stored grain. 2427-2430
  
• Guodong Li, Jianyi Peng, Jijie Su, Chaofeng Zhao, Mengnan Gao:
  The integrated design of small multi-axis driver based on CANopen protocol. 2431-2434
  
• Xiaofu Li, Haihu Yu, Hua Huang, Dongsheng Zhang:
  Numerical simulation and analysis of spectral characteristic for weak fiber Bragg grating. 2435-2438
  
• Jian Cao, Yumin Su:
  Input-output linearization design for dive-plane control of AUV. 2439-2442
  
• Licheng Qu, Dayue Sun, Wei Cao, Peng Li:
  Study and design of fine marking and accurate positing for expressway network. 2443-2446
  
• Yuanshu Jing, Xueyuan Li, Alexander Thimm:
  Simulation of soil moisture content and its application of peanut field in low hilly area in southern China. 2447-2450
  
• Guangming Lv, Xiaomeng Sun, Yuyong Tang:
  A universal model for ruled surface's linear cutting with four-axis linkage machine. 2451-2453
  
• Jun Li, Jihong Xiu, Pu Huang, Youyi Li, Li Chen:
  Non-linear compensation algorithm of LOS locating in aerial remote sensor. 2454-2457
  
• Hua Bai, Bing Chen:
  Study on the integrity detection and evaluation method of damaged pipeline. 2458-2461
  
• Zhi-an Yang:
  Ponderomotive force of a electromechanical coupling system and its application. 2462-2465
  
• Ai-lan Li, Bo-wei Cao:
  Study on virtual soldier's behavior modeling in urban battlefield simulation. 2466-2469
  
• Ronghe Liu, Kaiping Yu, Kai Yang, Wei Liu:
  Model updating applied to an missile structure. 2470-2473
  
• Zheng Gao, Yueqing Zhou:
  Research on switching losses for induction heating power supply with LLC resonant load. 2474-2477
  
• Minming Zou, Fujun Shang, Wei Huang, Yong Liu, Wenlu Shi:
  Preparation of titanium nanopowder by induction plasma technology. 2478-2481
  
• Hao Gong, Zhan-xue Wang:
  Effects of intercooling and recuperation on turbofan engine performance. 2482-2485
  
• Huawa Yu, Jing Wang, Yangan Yan, Xin Wang, Bin Gao, Hanchen Liu, Yali Du:
  ZnO thin films produced by the RF magnetron sputtering. 2486-2489
  
• Xiaoyu Ma, Feiyan Chen:
  Data acquisition technology of link layer filtering under Linux environment. 2490-2492
  
• Lin Gong, Dingjun Hu:
  The algorithm of creating cloud in sky. 2493-2496
  
• Lei Du, Weifeng Peng, Jian Huang:
  Simulation and research on mechanism-hydraulics system of working device of HT-25J wheel loader. 2497-2500
  
• Gaowa, Wuyun:
  A research on influences of wind and solar power generation system on the grid and the control strategies. 2501-2504
  
• Xiaoyu Ma, Kun Mu:
  Study on 2-dimensional microphone circular array speech enhancement algorithm based on the DOA. 2505-2508
  
• Ying-Guang Sun:
  Access control method based on multi-level security tag for distributed database system. 2509-2512
  
• Qianliang Chen:
  The system development of FMS monitoring and fault diagnosis. 2513-2516
  
• Xiang Sun, Baoguo Wu, Huarui Wu, Huaji Zhu, Yan Liu:
  Design of vineyard production monitoring system based on wireless sensor networks. 2517-2520
  
• Gang Zhou:
  Design of carving machine controller based on MCX314. 2521-2523
  
• Xiaofu Li, Haihu Yu, Yuanyuan Jiang, Dongsheng Zhang:
  Study of sensing properties of quartz fiber Bragg grating sensor based on metalized encapsulation. 2524-2527
  
• Zhen Yang, Hui Wang, Xiaoming Han, Wei Fang:
  Damping force of MR damper analysis and experimental. 2528-2531
  
• Xudan Dang, Xinli Wang, Meng Wei, Jun Xiao:
  Finite element analysis of X-cor sandwich's compressive modulus. 2532-2535
  
• Shengxue Qin, Jidong Hao, Lixin Ren, Xingming Xu:
  Design and mechanics simulation for shell parts of fiber composites. 2536-2539
  
• Xian Huang, Tiemin Li, Boqiang Xu, Jun Wu:
  Parameter design and manufacture for the 4RRR parallel manipulator. 2540-2543
  
• Jin Wei, Zhe Li:
  Study on large-scale in-situ immersion static load test for bearing behavior of collapsible loess pile foundation. 2544-2547
  
• Xiao-juan Zhou, Jun-sheng Zhang:
  An improved fair subcarrier allocation algorithm for multiuser OFDM system. 2548-2552
  
• Weijun Xing, Yi Li:
  The computer application in the route measurement. 2553-2556
  
• Xiangyu Dong, Junqiang Xi:
  The study of shift strategy for pure electric bus without synchronizer. 2557-2562
  
• Xuejuan Hu, Shuangchen Ruan, Chengxiang Liu:
  An approach of near infrared image accurate orientation and recognition. 2563-2566
  
• Xiaoxia Zheng:
  Computer network security and measures. 2567-2570
  
• Bo Xiao, Bilong Wen:
  Unified format definition for bulk data. 2571-2575
  
• Yanqiu Cui, Yaning Yang, Tao Zhang:
  Computer-aided design of lead compensator of control system via MATLAB. 2576-2578
  
• Wei Fan, Zhongshen Li, Shouhong Chen:
  Research on PZT multi-channel power supply and control method. 2579-2582
  
• Yun-chao Song, Chun-hai Wang, Zhi Ning:
  Study on wetting model with combined level Set-VOF method when drop impact onto a dry surface. 2583-2586
  
• Peng Liu, Kun Zhang:
  Back analysis of non-adiabatic temperature parameters of roller-compacted concrete. 2587-2589
  
• Xiaogang Wu, Languang Lu, Mingyin Hu, Yuankun Xiao:
  Pattern matching and simulation research of extended range electric vehicle. 2590-2595
  
• Kangkang Zhang, Jianqiu Li, Minggao Ouyang, Jing Gu, Yan Ma:
  Electric braking performance analysis of PMSM for electric vehicle applications. 2596-2599
  
• Xiaomin Zhang, Ping Cheng, Juan Ni, Ze Li:
  Microwave frequency measurement using photonic methods. 2600-2605
  
• Manyu Zhang, Weimin Zhao:
  Discuss the modeling technique of 3D animated characters under three-dimensional visual angle. 2606-2608
  
• Wenxian Huang, Hong Yan:
  Effect of cerium addition on microstructure and mechanical properties of die-cast AM60 alloy. 2609-2611
  
• Yuan-peng Liu, Zhen-hua Wen:
  Application of BP neural network in welding joint data processing. 2612-2614
  
• Haibo Liu, Kefei Song:
  Technology of USB HOST applying in traffic controller based on ISP1161A. 2615-2618
  
• Xiao-lin Chen, Shan-cong Zhang, Jie Liu:
  Design of UAV video compression system based on H.264 encoding algorithm. 2619-2622
  
• Xin Song, Chun Jia:
  Research on the influence of a contour - Parallel path interval on the surface quality in NC machining a spatially curved surface. 2623-2627
  
• Xin Song, Yantao Yang, Bing Yu:
  Research on method choosing parting line in die NC machining. 2628-2631
  
• Guo Kui, Minyan Li, Xingquan Zhai:
  Force analysis of tension hoses based on catenary theory. 2632-2635
  
• Chao Gao, Xiaoya Hu, Bingwen Wang, Lejiang Guo, Wei Wang:
  Design of train ride quality testing system based on wireless sensor network. 2636-2639
  
• Zhang Jiong, Zuwei Yu:
  Imperfect monitoring and impermanent reputations in infinite dynamic games. 2640-2643
  
• Jiajia He, Zai-en Hou:
  Ant colony algorithm for a class of non-differentiable optimization problems. 2644-2647
  
• Qian Xie, Xiaohui Zhang:
  The application of web log in collaborative filtering recommendation algorithm. 2648-2650
  
• Bo Sun, Guangtai Qin, Yadong Fang:
  Research of standard parts library construction for SolidWorks by Visual Basic. 2651-2654
  
• Haihua Yu:
  Equivalent analogy correction parameter tuning method of digital control system. 2655-2658
  
• Xiao Ke, Ouyang Ge:
  Base on research of un-calibrated visual servo in crawling object with dexterous hand. 2659-2662
  
• Xiao-li Li, Hua Zhou:
  Double-pass optical parametric chirped pulse amplifier. 2663-2665
  
• Liu Cheng:
  Study on the meticulous management mode in shaanxi local construction enterprises based on ERP. 2666-2670
  
• Ying Wang, Hao Bu, Yimin Qiu:
  The flexible integration of inference algorithm based on users' preference. 2671-2674
  
• Huilin Yao, Songlan Zhang, Zhenpeng Wang:
  Blind equalization algorithm based on least squares support vector regressor. 2675-2678
  
• Wensheng Su, Fengtao Wang:
  Design and development of rolling bearing vibration signal analysis system. 2679-2682
  
• Yu Yuan, Congming Li, Tingyu Wang, Xing Zhao:
  Design of empirical mode decomposition and HHT system base on LabVIEW. 2683-2686
  
• Jianjun Peng, Ruifeng Guo, Jiping Li, Zhixiang Shao, Jie Li:
  Research on tool swept volume in NC simulation. 2687-2690
  
• Guofu Yin:
  On process industry control based on wireless sensor network technology. 2691-2694
  
• Yao Dai, Junfeng Liu, Lei Zhang, Shimin Li:
  The crack-tip higher order field of functionally graded circular plates based on Reissner's plate theory. 2695-2698
  
• Yao Dai, Lei Zhang, Shiming Li, Xiao Chong, Junfeng Liu:
  The higher order crack-tip field of functionally graded reissner's spherical shell. 2699-2701
  
• Demin Chen, Yueyin Ma, Guoqiang Liu, Wei Sun, Xiaolin Guo, Xaofei Shi:
  Yield criterion and unified strength theory of Zr-based bulk metallic glass. 2702-2705
  
• Demin Chen, Yueyin Ma, Wei Sun, Xiaolin Guo, Xaofei Shi:
  Research of design and vibration reduction of dual mass flywheel with arc helix spring. 2706-2709
  
• Yang Wang, Zhihua Cai:
  A novel hybrid biogeography-based optimization with differential mutation. 2710-2714
  
• Yu Yuan, Congming Li, Tingyu Wang, Xing Zhao:
  Fault diagnosis and classification for bearing based on EMD-ICA. 2715-2718
  
• Liu Jing, Xinli Liu, Guofu Yin:
  The research and implementation of the method of pretreating the face images based on OpenCV machine visual library. 2719-2721
  
• Liu Jing, Zhibin Ren, Juhai Wang:
  The research and implementation of the method of face image standardization based on projection and geometric transformation. 2722-2724
  
• Min Xu, Runhuai Yang, Yong Cheng, Hongcheng Xu:
  Kinematics modeling and step climbing study of an all-terrain wheeled mobile robot on uneven terrains. 2725-2728
  
• Shan Xue, Guohua Cao, Qiongying Lv, Hongji Xu:
  Modal analysis and optimization of novel external rotor radar stabilized platform. 2729-2733
  
• Jichun Wang, Dong Xiao:
  Stability of neutral type singular systems. 2734-2737
  
• Song Li, Manyuan Ye:
  Simulation study of harmonic elimination technology for multi-level inverters. 2738-2741
  
• Song Gu, Chunyu Liu, Guang Jin:
  High-resolution Fourier lens design. 2742-2744
  
• Mingxin Zhu, Zhen Liu, Yongxiang Xu:
  Error compensation algorithm and performance evaluation for phase-shifting interferometer. 2745-2748
  
• Yongcheng Wang, Kefei Song:
  A new approach to realize UART. 2749-2752
  
• Yongqiu Chen, Guangbin Yu, Yingjie Ao:
  Improved neural network and its application in dynamic optimal design of RV reducer. 2753-2756
  
• Junhui Xiong, Shengjing Tang, Jie Guo:
  Approach of aircraft configuration with complex free-form surface design based on reverse engineering. 2757-2761
  
• Dongsheng You:
  The arbitrary point of working and locating breakpoint techniques based on the FANUC 0i NC system. 2762-2764
  
• Zhenqiang Wang, Yi-sheng Zhu, Nan Liu:
  An improved mobile location approach based on RSCP difference. 2765-2768
  
• Wuju Ma, Xiaodong Song, Xiaoxian Yao:
  Transitional ballistic trajectory optimization of a supersonic target cruise missile. 2769-2772
  
• Hongwen Lin, Shaoqing Yang, Linzhou Xu:
  Watermark algorithm for color image authentication and restoration. 2773-2776
  
• Zheng Huang, Tielin Shi:
  The motion accuracy reliability research of hydraulic amplifier mechanism in naval ships. 2777-2780
  
• Lei Huang, Jian-guo Nan, Yong-hua Sui, Lei Guo:
  An image retrieval method based on personalized image semantic model. 2781-2784
  
• Xiyu Li, Tong Zhu, Chao Wei, Yiping Wang:
  Research on an improved two-wheeled robot. 2785-2787
  
• Wenzhe Gu, Qibo Sun, Fujing He, Shuai Miao:
  An improved ant routing algorithm for HAP networks. 2788-2791
  
• Gang Wang, Huina Yang:
  Optimal design of high-power, mid-high frequency transformer. 2792-2795
  
• Yiping Wang, Xiyu Li, Jia Tian:
  Blackboard mechanism based genetic algorithm for dynamic deployment of mobile sensor networks. 2796-2799
  
• Jing Zhang, Qiang Gao:
  The virtual prototype combination simulation in design for the Shaper Mechanism based on ADAMS and SolidWorks. 2800-2803
  
• Lianmao Hang, Zhiyong Zhang, Junfeng Yan:
  Synthesis of ZnO nanocrystals with different morphologies by hydrothermal method. 2804-2806
  
• Shaoqing Yang, Hongwen Lin, Anqing Zhang, Linzhou Xu:
  A color image fusion method using discrete wavelet frames. 2807-2810
  
• Shaoqing Yang, Hongwen Lin, Shuchang Cheng, Anqing Zhang:
  Comparison between two nonlinear sea-aero target detection methods. 2811-2813
  
• Mingyv Wang, Shaojun Zhang, Jundong Zhang, Fengyi Yu:
  Prediction of performance and exhaust emission of a marine electronic control diesel engine based on modeling of BP neural networks. 2814-2817
  
• Chunfang Dong, Juan Lu, Qingxin Meng:
  Position control of an electro-hydraulic servo system based on improved Smith predictor. 2818-2821
  
• Tao Yu, Su-yu Wang, Yun-xiao Fan:
  The manufacturing method of diamond dressing gears for the dressing of gear grinding worms. 2822-2824
  
• Xiaodong Song, Xiaoxian Yao, Gang Yin:
  A study of model reference adaptive control for variable-pressure pump. 2825-2828
  
• Xiaolei Li, Xiangrong Wang:
  An unstructured P2P network search algorithm based on percolation theory. 2833-2836
  
• Lei Zhang, Tao Dong, Zhaochu Yang, Nuno M. M. Pires, Yulong Zhang:
  Fabrication of vanadium oxide for uncooled FPAs using dual magnetron AC sputtering. 2837-2840
  
• Nuno M. M. Pires, Tao Dong, Zhaochu Yang, Frank Karlsen:
  Detection of pathogens using bio-activated nickel hexacyanoferrate film coated interdigitated microelectrodes. 2841-2844
  
• Haitao Min, Dongjin Ye, Liguo Wang, Yuanbin Yu:
  Experiment study and control strategy simulation on powertrain for an electric bus. 2845-2849
  
• Fang Li:
  Study of MIS for greenhouse group environment in North China. 2850-2852
  
• Xiao-Yun Xiong, Bing Wang:
  Study on forest fires recognition and moving target tracking in video surveillance system. 2853-2856
  
• Abolfazl Malekmohammadi, Hossein Ghayoumi Zadeh, Ali Shirzad Nilsaz-Nejad:
  A low-power and high-gain mixer design for UWB receiver. 2857-2860
  
• Chunbin Gao, Xiumin Yu:
  The research on prediction model of HEV Ni-MH battery capacity. 2861-2864
  
• Ke Jing, Zhe Kan, Fang Li, Xiaolei Wang:
  The study about flow velocity measurement with spatial filter principle based on the electrostatic sensor. 2865-2868
  
• Zhongzhu Liu, Chunguang Xu, Bolong Men:
  Application of SAGE algorithm to estimate thin layer material's thickness in ultrasonic NDE. 2869-2872
  
• Haiqiang Chen, Jinfeng Li, Tuanfa Qin:
  The modified reliability-based iterative majority-logic decoding algorithm for structured LDPC codes. 2873-2875
  
• Hui Huang, Siyu Bai, Xiaoqian Du, Nansheng Pang:
  Application of genetic annealing algorithm in multi-resource balanced optimization considering maneuver time. 2876-2879
  
• Danping Gu, Zhaohui Pang, Fan Zhang, Yunfeng Wang:
  Study on fault diagnosis of power transformer based on similarity measures between vague sets. 2880-2883
  
• Zhongwen Zhao, Nan Song:
  Grid resource scheduling strategy based on sequential game. 2884-2887
  
• Xianguang Kong, Yuanying Qiu:
  Three-dimensional digital process typesetting and printing system based on DELMIA. 2888-2891
  
• Lixia Deng, Shengxiang Gao:
  The design for the controller of the linear inverted pendulum based on backstepping. 2892-2895
  
• Yan-qin Zhang:
  Optimization of blank holder force based on CAE and neural network. 2896-2899
  
• Weihua Liu, Yubin Gao:
  Compensation of variable pitch roller chains for the polygon effect. 2900-2903
  
• Weiping Xu, Liming Ke, Li Xing:
  Carbon nanoatubes on aluminum matrix composites by friction stir processing. 2904-2907
  
• Yewei Du, Juanqin Xue, Yunfeng Xue, Dandan Wen, Xiaona Ma:
  Preparation of modified chitosan by salicylaldehyde. 2908-2911
  
• Yun-feng Xue, Juan-qin Xue, Jing-xian Li, Dan-dan Wen, Ye-wei Du, Xiao-na Ma:
  Study on the preparation of crosslinked chitosan-based resin. 2912-2915
  
• Xuebo Zi, Daqian Zhang:
  Design of cab monitoring image transmission system based on ZigBee protocol. 2916-2919
  
• Liping Zhang:
  Elastic vibration research of the non-sinusoidal oscillation system for the mold of continuous casting. 2920-2923
  
• Li Gao, Tieli Ye, Yongjin Yu:
  Evaluation of intelligent algorithms for Multidisciplinary Design Optimization. 2924-2927
  
• Luo Dan:
  On computer aided design college art design thinking course. 2928-2930
  
• Yang Liu, Kun Li, Xiaodong Song, Xiaoxian Yao:
  Monte Carlo ballistic simulation applied to dispersion analysis of starting control points for Antitank Missile. 2929-2932
  
• Luo Dan:
  Art education vocational curriculum study digital art. 2931-2933
  
• Luo Dan:
  Computer graphic design software applications in graphic design. 2934-2937
  
• Xiaojuan Sun, Wei Wu:
  A new sliding mode control of STATCOM and its effects on wind farm. 2938-2941
  
• Xueming Yang:
  Comparison of the LS-SVM based load forecasting models. 2942-2945
  
• Xueming Yang:
  Daily load forecasting based on rough sets and relevance vector machine. 2946-2949
  
• Qixiang Jiao, Yuanpei Lan, Zhidong Guan, Zhengneng Li:
  A new material selection approach using PROMETHEE method. 2950-2954
  
• Zhimin Liu:
  Reliability evaluation of FPC under bending stress. 2955-2958
  
• Zhenliang Li, Wenliang Li, Ya Li:
  The kinematics analysis and simulation of the transposition manipulator. 2959-2962
  
• Zhicheng Huang:
  The finite element analysis on the main load bearing member of high-pressure grouting machine used for daily ceramics. 2963-2966
  
• Haidong Chen, Zhouxing Fu, Baoji Yun, Lihe, Ran Yu, Shangbin Sun, Xuejie Chen:
  IED modeling based on IEC61850 standard. 2967-2970
  
• Yue Min Zhang, Xiaolin Wang, Qiang Gao:
  The judge of modified oblique plane double enveloping worm gear tooth contact line style. 2971-2973
  
• Guangwen Zhang, Chunyu Wang:
  Research of Web3D-based ceramic products virtual displaying platform. 2974-2977
  
• Dayong Geng, Wenge Ma:
  Research on energy saving for shift-beam oil pump motors based on fuzzy control. 2978-2981
  
• Wenjie Zhang, Zuo Wang, Donghui Zhao:
  Design of autogenous tumbling mill hydrostatic bearing monitor and control system based on WinCC. 2982-2984
  
• Xiao-kun Wang, Wei-qiang Chen, Xin Liu, Yue-gao Li, San-gang Mu:
  Research on standardization of vehicle terminals communication protocols in intelligent public traffic system. 2985-2990
  
• Chang-jian Zhou, Zheng-shun Wang, Rong-ai Meng, Jing-dan Sun:
  Research of paper machine electromagnetic dryer based on intelligence control system. 2991-2994
  
• Jianhai Li, Lingshun Liu, Yunfeng Ling:
  The design of wireless monitoring system based on intelligent sensor. 2995-2997
  
• Bin Zhang, Shilu Chen, Min Xu:
  Entry trajectory generation based on neural network. 2998-3001
  
• Mingfei Wei, Fang Yang, Junqi Yu, Xiaojuan Zhu:
  Research on floating-gate ISFET biosensor. 3002-3005
  
• Fei Chen, Jianming Li, Weichao Zhong:
  Application of power matching on optimization of three way valve controlled differential cylinder. 3006-3009
  
• Hong Li:
  Experimental study of surface roughness on abrasive belt grinding. 3010-3013
  
• Wenjun Li:
  The application of exponential filter on optical measurement of atmospheric compositions. 3014-3018
  
• Wenjun Li:
  Improving accuracy of benzene detection based on optical atmospheric composition measurement technology. 3019-3023
  
• Taijun Wang, Qin Yu, Yuming Mao:
  Memristor-based cell design and digital logical operations implementation. 3024-3027
  
• Tao Xu, Xiaodong Zhang, Yanjun Lu:
  Onboard controlling system design of unmanned airship. 3028-3031
  
• Zhenxing Yin, Min Zhang, Jinyong Yin:
  A method for correction of multitemporal satellite imagery. 3032-3035
  
• Jingkun Liang, Chunping Zhang, Hongshuo Liang:
  Study of hospital-bed calling information system based on motor imagery. 3036-3038
  
• Shenggang Yang, Xiaoli Li, Ming Liang:
  Bearing fault diagnosis of a wind turbine using maximum likelihood detection. 3039-3042
  
• Yejian Yao, Wenhu Wang, Dezhong Zhao:
  Research on the layout optimization method for ceramic core locator in investment casting die. 3043-3047
  
• Zhe Wang, Yinchuan Wang, Kai Luo:
  Trusted computing technology analyzing in NGSCB. 3048-3053
  
• Xuefeng Jiang:
  A facial expression recognition model based on HMM. 3054-3057
  
• Na Xu, Changsheng Liu, Ying Wang:
  A multi-bit digital watermarking algorithm with side information. 3058-3061
  
• Jing-chen Hou, Na Yi, Xue-dan Huang:
  Model reference control approach for uncertain switched systems. 3062-3065
  
• Jinping Sun, Tiankai Sun, Daihong Jiang:
  Design and application of video attemper system based on ip network in the intelligent transportation. 3066-3069
  
• Fenglong Shen, Yongkui Man, Jianhui Wang:
  The research on the control of induction motor system based on different field orientation. 3070-3074
  
• Wenming Wang, Weiwei Song, Xiuhua Su, Shukun Cao, Liang Ding, Xinhua Wang:
  Study on vibration and durability testing for motorcycle frame. 3075-3078
  
• Hui Bai, Shihuang Shao, Hongyu Wang:
  A VTOL quadrotor platform for multi-UAV path planning. 3079-3081
  
• Qiwei Wang, Budan Wu, Junliang Chen:
  A research on optimization algorithm for BPEL process based on synchronization and concurrency analysis. 3082-3085
  
• Guanghui Liu, Jun Zhou, Xiaozhou Yu:
  The design and realization of small-sized UAV solid data recorder. 3086-3091
  
• Xiao-mei Zhu, Qun-yan Zhang, Xin Ren:
  The research of software reliability measure based on conditional value at risk. 3092-3094
  
• Qun-yan Zhang, Xiao-mei Zhu, Kun Xu:
  Combination forecasting on software reliability based on entropy weight. 3095-3097
  
• Tong-lin Wang, Bin Yang:
  Design of architecture for Internet of Thing based on dynamic multi-dimensional information structure. 3098-3100
  
• Xiang Cheng, Xuan Xiao, Yanhong Wang:
  Emission reduction measures in ceramics. 3101-3104
  
• Binxiang Liu, Xiang Cheng, Xuan Xiao:
  Green ceramic body and glaze formulation system. 3105-3108
  
• Yanhong Wang, Xiang Cheng:
  Wavelet neural network optimization applied to intrusion detection. 3109-3112
  
• Kun Zhang, Peng Liu:
  Analysis on the influence of temperature differences affecting on the stress of thin-walled concrete structure. 3113-3115
  
• Wei Xiong, Zhongren Wang:
  Study on grinding deformation of Al2O3-TiC slender bar. 3116-3119
  
• Shuhui Shi, Chunyuan Zhao:
  Output feedback control of switched systems: Instrumental matrix method. 3120-3123
  
• Hua Wang, Bingxiang Liu, Xiang Cheng, Xuan Xiao:
  An exchange rate forecasting method based on probabilistic neural network. 3124-3126
  
• Lin Zhang, Yifei Yuan, Guanghui Min:
  Preparation and properties of PVB/nano-LaB6 composite films. 3127-3129
  
• Xianglian Liu, Yi Qin:
  Research of transparent object by means of LED-based digital holography. 3130-3133
  
• Zhou Peng, Baojun Zhao:
  Novel scheme for infrared image enhancement based on Contourlet transform. 3134-3137
  
• Zhaoying Wang, Zhentao Liu, Weiqun Liu, Yunbo Kong:
  Particle filter algorithm based on adaptive resampling strategy. 3138-3141
  
• Wei Xiong, Dongqing Xie, Ling-Xi Peng, Jie Liu:
  PrChord: A probability routing structured P2P protocol. 3142-3145
  
• Jun Chu, Yi Zhang:
  Structural optimization of intake pipe based on pulsation. 3146-3149
  
• Lin Wan, Chun Wang:
  Study and experiment on key component of vegetables transplanter. 3150-3153
  
• Lina Chen:
  Research of vehicle brake system characteristic based on simulation analysis. 3154-3156
  
• Fanbiao Bao, Bing Li:
  Research on vehicle air suspension system dynamic simulation. 3157-3160
  
• Hong Zhang, Chuncheng Shi, Liang Zhao, Daqing Zhao, Jinxing Jie:
  Study on distribution static synchronous compensatorbased on Immune Genetic Algorithm PID. 3161-3164
  
• Hongyan Wang, Jinbo Lu, Xunbo Li:
  Study of a pneumatic constant force tracking system. 3165-3169
  
• Shurong Liu, Xiangping Meng, Wei Pang, Hui Wang:
  Research of multi-modal function optimization based on multi-agent immune genetic algorithm. 3170-3173
  
• Yanzhe Wang, Chuncheng Shi, Jin Xu:
  The research and implementation of a medical image 3-D measurement technique based on VTK. 3174-3177
  
• Yongsheng Wang, Yuanhong Li, Mingyan Yu:
  A 16 bit low voltage low power Delta Sigma modulator. 3178-3181
  
• Lingwei Shi, Heguang Liu, Ke Xu, Shuangbao Yang, Lei Wang:
  Influencing factors on re-tracking accuracies of SAR altimeter ocean power waveforms. 3182-3185
  
• Xuzhu Wang, Xueli Cai:
  Analysis of mirror-tilting and sampling errors in Fourier transform spectrometry and design of error analysis Graphical User Interface. 3186-3189
  
• Ying Leng, Lingshu Zhao:
  Novel design of intelligent internet-of-vehicles management system based on cloud-computing and Internet-of-Things. 3190-3193
  
• Xing Zhong, Guang Jin:
  Design and simulation of CMOS star sensor lens with large relative aperture and wide field. 3194-3197
  
• Chunfang Liu, Yin-Long Xing, Tong Wang:
  Research of double servo system synchronization control base on decouple compensation control. 3198-3201
  
• Chunfang Liu, Yin-Long Xing, Tong Wang:
  Gantry machining center feed-forward double close loop Maglev system fuzzy synchronization control. 3202-3205
  
• Su-ling Wang, Qing-bin Li, Zheng-wei Tian, Li Fan:
  Impact analysis on contact force between the rod and oil-tubing by rod string longitudinal vibration. 3206-3209
  
• Liang Chu, Jian Chen, Liang Yao, Libo Chao, Yongsheng Zhang, Minghui Liu, Ziliang Zhao:
  Vehicle stability control algorithm based on optimal fuzzy theory. 3210-3213
  
• Maoting Li, Xiaokai Gong, Wei Dong, Wenliang Li:
  The cooling tower fan system fault monitoring based on the trunk of RS485. 3214-3216
  
• Hongliang Chen, Ying Wang, Gaoping Shi:
  Flow numerical simulation in the impeller of sewage pump. 3217-3220
  
• Geqiang Li, Hanjie Wang, Xiaodong Huang, Hongyan Yang:
  Research on the control scheme of direct drive electro-hydraulic position servo system. 3221-3224
  
• Liang Chu, Libo Chao, Yongsheng Zhang, Yanru Shi:
  Design of longitudinal vehicle velocity observer using fuzzy logic and Kalman filter. 3225-3228
  
• Yanqiu Chen, Pengyun Song, Jiye Zhang, Keyue Zhang:
  Robust controller design for active suspension based on μ-synthesis. 3229-3233
  
• Liang Chu, Jiankun Yin, Liang Yao, Wei Wang:
  The method for matching the PMSM's base parameters of the Hybrid Electric Vehicle based on drive cycle. 3234-3237
  
• Liang Chu, Feikun Zhou, Jianhua Guo, Mingli Shang:
  Investigation of determining of regenerative braking torque based on associated efficiency optimization of electric motor and power battery using GA. 3238-3241
  
• Kaiyu Zhang, Hong Zhao, Di Lu:
  Research on power quality monitoring system of oil field based on ARM. 3242-3245
  
• Libo Chao, Liang Chu, Yang Ou, Wenbo Lu:
  Traction control algorithm based on fuzzy PID and PWM modulation. 3246-3249
  
• Shuangying Xu, Jian Ma, Lei Zhang, Xiaolin Gao:
  Linear regression prediction model of prefecture level highway passenger transport volume. 3250-3253
  
• Sun Liang, Feimei Gan:
  Balance control of two-wheeled robot based on reinforcement learning. 3254-3257
  
• Naigong Yu, Zikai Wang:
  Collision avoidance planning of manipulator based on C-space layered search arithmetic. 3258-3262
  
• Lei Zhang, Jinsong Yao, Xuezhi Jia, Guang Jin:
  Research on lightweight outer baffle for coaxial space camera. 3263-3265
  
• Renhao Zhou, Jianliang Hao, Hongwu Cao, Hongwei Fan:
  An empirical study on Differential Evolution algorithm and its several variants. 3266-3271
  
• Hongwu Cao, Renhao Zhou, Jianliang Hao:
  An introduction of multisensor optimal information fusion based on Kalman filter method. 3272-3276
  
• Xiangdong Pang, Dawei Meng, Hongwen Yin, Zhengang Dong:
  Analysis and design of tilted pad for the thrust bearing at the high temperature and load in submersible motor. 3277-3280
  
• Wei Chen, Yong Zhai, Gang Tao, Yuefeng Ma:
  Multi-node data acquisition and analysis system for the development of AT electronic control unit. 3281-3284
  
• Guobing Zhou, Tingting Liu, Xinxin Liu:
  Algorithm and strategy research of generating test paper for large scale online examination. 3285-3288
  
• Dongkai Jia, Ke Wu, Shi Wu, Yuntong Jia, Chao Liang:
  The structural analysis and optimization of diesel engine connecting rod. 3289-3292
  
• Xiulin Sui, Ping Zhao, Chunhong Zhang, Ping Zhang, Na Hu:
  Modeling and compensation analysis of ball-end milling cutter wear. 3293-3296
  
• Xiulin Sui, Jianghua Ge, Jingrui Qi, Yaping Wang, He Sun:
  Research on method of ontology configuration oriented to individual demand products. 3297-3300
  
• Jianghua Ge, He Sun, Yaping Wang, Jingrui Qi:
  Research and development on mechanical products rapid design system oriented to individual requirements. 3301-3304
  
• Zhuoran Zhang, Zhe Mao, Hailing Wan:
  The 6 layers stereo garage design based on omron PLC. 2682-2685
  
• Mingyi Cui:
  A threshold denoising based floating point representation genetic algorithm. 3305-3308
  
• Jun Rong, Yiming Li:
  Modeling and simulation of the double-closed loop control system of counter rotating permanent magnet brushless DC motor. 3309-3313
  
• Fang Wang, Ying Peng:
  Positional judgement algorithm based on mathematical morphology. 3314-3316
  
• Qingpeng Han:
  Distinction non-stationary pulse wave signals with HHT method. 3317-3320
  
• Xiaofeng Wang:
  A family of three-step eighth-order iterative methods for solving nonlinear equations. 3321-3325
  
• Xiao-Jun Ma, Yan Ma:
  Heat error modeling methods of NC machine tool machining holes or slots of door hardware based on genetic algorithms. 3326-3329
  
• Hai-yan Zhai, Hui Qi, Jing-son Shan:
  The building analysis of software basic course group in the computer specialty. 3330-3332
  
• Qing Wang, Yidu Zhang:
  Coupled dynamic response of two-stage helical gear driving system. 3333-3336
  
• Cheng-gang Wang, Jian-hai Li, Jing Sun, Yan-li Sun:
  Design of test and diagnosis system for FPGA circuit board based on functional modeling. 3337-3340
  
• Yao Yao, Ming-min Zhang, Xie Yang, Jun Yuan:
  Adaptive beam pattern optimization of planar array under main lobe interference condition. 3341-3344
  
• Yanbin Zhang, Xiaoling He, Xin Wu, Guoliang Zhai:
  Kinematic analysis of a novel spatial uncoupled parallel manipulator. 3345-3348
  
• Yulin Lu, Tao Lu, Li Wang, Wenqian Li, Jvwen Li:
  Numerical analysis of the convective coefficient on cooling water pipe embedded in concrete. 3349-3352
  
• Zhi Ji, Fengyou He:
  Maximum torque control of servo motor for wide speed range. 3353-3357
  
• Zhiyuan Ren, Liang Wang, Guixian Yang:
  Study on micro-electric machine system and resonance beam style sensor. 3358-3361
  
• Chang-yong Li, Yan-wei Zhang, Yin-fan Li, Shao-hua Wang, Xiao-jun Liao:
  Volcano smoke planar ultra-wide band antenna. 3362-3364
  
• Xia Sun, Lixiu Ma:
  Application of nRF2401 in the network management of chemical industry. 3365-3367
  
• Huizi An, Wei Li:
  Synthetically improved genetic algorithm on the traveling salesman problem in material transportation. 3368-3371
  
• Weitao Jiang, Huixian Tang:
  The study of the influence mechanism of entrepreneurial social capital based on the theory of structural holes. 3372-3375
  
• Yanhong Zhao, Xiaojun Wen:
  A covert communication protocol based on quantum dense coding. 3376-3379
  
• You Li, Honge Ren:
  Development and design of automatic log scale system. 3380-3383
  
• Shiping Zhu, Juqiang Chen, Kamel Belloulata:
  A new fractal stereo video coding method. 3384-3387
  
• Guodong Jiang:
  Direct Numerical Control Techniques applications in local area network. 3388-3390
  
• Yongling Chu, Shaochun Li, Mei Wang, Yanhua Che:
  Resarch of image magnifying algorithm based on cubic spline interpolation. 3391-3394
  
• Zhongdong Xiao, Guanghui Zhou:
  Research on structural stability of eco-industrial system (EIS). 3395-3399
  
• Shuhui Wang, Licheng Wu, Haiwen Yuan:
  Dynamic modeling and fuzzy control of water strider robot. 3400-3403
  
• Shizhuo Zheng, Xin Zhang, Zhiyong Shen:
  Study on cycle-by-cycle variations of ion current integral and pressure in spark ignition engine. 3404-3407
  
• Jingyun Liu, Huiling Zhou, Xiaoguang Zhou, Yang Cao, Huiyi Zhao:
  Automative air conditioning system control - A survey. 3408-3412
  
• Guosheng Liu, Meizhu Yang:
  Discriminative locality preserving dimensionality reduction based on must-link constraints. 3413-3417
  
• Hongying Huo:
  Signal extraction algorithm of high-tension and low-tension based on artificial intelligence. 3418-3421
  
• Hanning Wang, Weixiang Xu, Chaolong Jia:
  Dynamic metadata query algorithm of high-speed railway basic data based on heterogeneous integration. 3422-3425
  
• Dongsheng Li, Shuliang Zou, Heshan Guan, Yuqiong Li:
  Quasi-bimolecular chain reaction model of energy in greenhouse eco-economic system and simulation. 3426-3428
  
• Feng Geng, Shengjun Xue:
  Mobile beacon node path scheme in arbitrary region for wireless sensor networks. 3429-3433
  
• Juan Kang, Chuangbai Xiao, Mike Deng, Jing Yu, Haifeng Liu:
  Image registration based on harris corner and mutual information. 3434-3437
  
• Yong Xin, Jian Xu, Bo Xu, Hui Xin:
  The inverted-pendulum model with consideration of pendulum resistance and its LQR controller. 3438-3441
  
• Mingjuan Cai, Haijun Wan, Shiping Tang, Ping Xu:
  Research on electromagnetic environment above board of ship radiated by HEMP. 3442-3444
  
• Chang-chun Chen, Zhao-wei Sun, Wei-chao Zhong:
  The satellite optimization design using collaborative optimization method based on normal cloud model. 3445-3448
  
• Ming Lu, Yaohua Li:
  A novel sensorless starting method of BLDC motor for large inertia systems. 3449-3452
  
• Yi-fei Chen, Sen Xu, Rui Cao, Tian Zhou:
  The study and simulation of PID control based on RBF neural network. 3453-3456
  
• Yiyuan Cheng, Zhengfang Wang:
  Research of the wear resistance of 35CrMoA steel in laser quenching /nitrided layer. 3457-3460
  
• Li-mao Han, Sen Xu, Tian Zhou:
  A fast spectral cluster algorithm based on bipartite graph. 3461-3464
  
• Yongxin Tang, Shaoxian Liu, Zengliang Liu:
  The metric model of software trustworthiness based on symbiosis theory. 3465-3469
  
• Loude Li, Hongjie Yuan:
  The design of airborne equipment environmental test system based on C#. 3470-3473
  
• Chengbo Yu, Jin Zhang, Yimeng Zhang:
  Maximum entropy image segmentationis based on improved QPSO algorithm. 3474-3477
  
• Kai Wang, Xiangrong Li, Chenzhen Li:
  Analysis on the injury of rear dummies in frontal crash test. 3478-3481
  
• Xiangrong Li, Kai Wang, Wei Mu:
  Research on SID-IIs rib characteristic based on DOE. 3482-3484
  
• Kai Wang, Xianglei Zhang, Yanhui Zhong:
  Research on the ratio control of Metal Belt CVT. 3485-3488
  
• Yanben Wang, Jurong Bai:
  A foggy image restoration algorithm. 3489-3491
  
• Qian Li, Yang Wang:
  The performance analysis of image encryption algorithm based on chaotic system. 3492-3494
  
• Shaohui Zhang, Zhanwei Chen:
  The research of Hilbert R-Tree spatial index algorithm based on hybrid clustering. 3495-3497
  
• Yao He, Jue Yang, WenMing Zhang, XiaXu Huang:
  Optimization design for the connection seat of A-type frame of mining dump truck. 3498-3501
  
• Xin Bai, Hua Liao, Han-Ben Niu:
  Study on the critical cathode-mesh electric field for designing a streak image tube. 3502-3504
  
• Ming-jin Xin, Yu-qiu Song, Wen-tao Ren, Xiao-hu Bai, Yan-qing Hu:
  Control system for constant pressure metering of fluid sowing machine. 3505-3508
  
• Yu-qiu Song, Ming-jin Xin, Hong-yu Ding, Xiu-fang Zhang, Yan-qing Hu:
  Process control system for scion and rootstock feeding of vegetable grafting machine. 3509-3512
  
• Shunyan Wang, Jun Wang, Fangfang Cao, Haitao Zhou:
  Research on mutual fusion scheme of IPv4 and IPv6. 3513-3516
  
• Xu Sun, Huapu Lu, Juan Wu:
  A simulation study on on-ramp control for expressways in Beijing. 3517-3521
  
• Xiaochong Li, Youzhi Yuan:
  Speech quality testing method of Cockpit Voice Recorder. 3522-3524
  
• Yanping Su, Jianfeng Cui, Gang Peng:
  Design of digital phase shift trigger of induction heating power supply. 3525-3528
  
• Yongling Fu, Yao Pang, Hesong Liu, Juan Chen:
  Switching transient simulation of redundant actuation system with mechanical backup. 3529-3532
  
• Rui Song, Feng Zhu, Zhihua Zhai, Peng Yao:
  Design and implementation of network-based embedded electricity management system. 3533-3538
  
• Qiang Xue, Xing Ai, Jun Zhao, Yuanyuan Liu, Yonghui Zhou:
  Analysis of microstructure and mechanical properties of graded nano-composite Si3N4-based ceramic cutting tool material. 3539-3542
  
• Juan Chen, Xiaoye Qi, Bohong Liu, Deyi Wang:
  Analysis of failure mechanism and stress influence on cylinder. 3543-3546
  
• Yongling Fu, Dianliang Fan, Haitao Qi, Weihong Wang:
  The application of co-simulation based on AMESim and Matlab in electro-hydraulic servo system. 3547-3550
  
• Zenggui Ou:
  Data structuring and effective retrieval in the mining of web sequential characteristic. 3551-3554
  
• You-Qiang Wang, Bing-Xi Huang, Jing-Wei Tong:
  Non-stationary elastohydrodynamic lubrication analysis of an involute spur gear. 3555-3557
  
• Xiang Zhang, Qian Fu, Liteng Zha, Zhibin Li:
  Analysis on relationships among variables about traffic capacity at intersections and reformation measures. 3558-3561
  
• Jun Zhou:
  Traffic signal coordination control of city arterial road that based on graphic method. 3562-3566
  
• Yanfu Wang, Chunfeng Wang, Zhenbo Wang, Li Xu:
  Prediction model of grind machining of engineering ceramics based on BP neural network. 3567-3570
  
• Shuchao He, Yan Meng:
  Simulation of automobile diesel engine under transient operating conditions. 3571-3574
  
• Heqin Liao, Zurong Qiu, Guohong Feng, Yajuan Zhang:
  The research of dissolved oxygen detection system based on fluorescence quenching principle. 3575-3578
  
• Jun Cheng:
  Design of high-precision FFT based on VHDL and analysis of code coverage. 3579-3582
  
• Chunting Li, Futian Sun:
  Treat the problems of beggars with game theory. 3583-3586
  
• Qin Yang, Jia-lian Shi:
  Research and design of public transportation system based on the classification theory on road traffic. 3587-3590
  
• Changyou Wu, Jiajie Shang:
  Research on model of agricultural machinery selection based on principal component projection. 3591-3594
  
• Mingen Zhong, Junqiang Peng, Hanchi Hong:
  Statistics analysis and eigenvalue construction of EEG for driving fatigue by fuzzy entropy arithmetic. 3595-3598
  
• Feixiang Zhao, Konghui Guo, Jianwei Zhang, Lihao Zhang, Fei Li, Lihua Yang:
  A study on H infinity control in electric power steering system. 3599-3602
  
• Zhenliang Li, Ya Li, Xiangzheng Jiang, Shuai Mo:
  A study and structural design of salt-packing machine. 3603-3606
  
• Xianghui Wang, Guoyin Zhang:
  Low cost token maintains ring-like P2P network. 3607-3610
  
• Dingying Tan, Pingping Chen, Huiling Liu, Xiufeng Liu:
  Application of color transferring base on Reinhard algorithm. 3611-3614
  
• Xin Yang:
  Nonlinear model of a flywheel vehicle. 3615-3617
  
• Xianghui Wang, Guochang Gu:
  Low maintenance cost small-world P2P network. 3618-3621
  
• Xianming Zhang, Ying Mu, Licun Wang, Yan Jang, Guoqiang Chen, Ping Li, Bing Chen:
  Mechanical analysis of key components and machine performance for the oil regeneration project compressor. 3622-3626
  
• Wenwen Yue, Weifan Huang:
  Admissibility of estimators for exponential distribution based on progressively Type-II censored sample. 3627-3630
  
• Liu-yi Gao, Yi-nan Zheng, Xue-yang Fang:
  A study on the calculation method of dispatching intervals in the module of "One Road One Line" public transport. 3631-3634
  
• Wei Wang, Xinhui Liu, Wei Chen:
  Research on fuel economy for HHV based on road and Traffic Information System. 3635-3638
  
• Xueyang Fang, Yinan Zheng, Liuyi Gao:
  Analysis of "One Road One Line with Straight Driving" Bus system based on TransCAD. 3639-3642
  
• Jingzhong Xiang, Xin Song:
  Study of thin-plate specimen fixture of high-frequency fatigue testing machine. 3643-3645
  
• Qi Wang, Lianwu Yang:
  Estimation for one-parameter exponential distribution based on progressively Type-II censored sample under a precautionary loss function. 3646-3649
  
• Yanyan Wu, Guobing Zhou:
  The analysis of electronic commerce project risk with the Bayes network. 3650-3653
  
• Changsen Song, Dewang Wu, Geng Zhang:
  Research on cooling system of medium-sized commercial electric drive vehicle. 3654-3657
  
• Guoyi Song, Jinxia Huang, Hua Han, Kui Zhao, Yufeng Zhang, He Sun:
  Robust stability research of a single-phase inverters with full-bridge converter. 3658-3661
  
• Jun Zhan, Xin Li, Weituo Hao, Yanjuan Qiao, Peng Guan, Xiao Liu:
  Software development for vehicle braking system integration and match. 3662-3665
  
• Moyi Jia, Huihui Chi:
  The research of temperature control system for cycle gas of CDQ export. 3666-3668
  
• Zunyi Deng, Zhongying Wang, Xueqin Gao:
  Design of automotive intelligent node based on CAN bus. 3669-3672
  
• Hongwei Wang, Likun Zhou:
  On imitation octopus sucker car tire tread layout optimization. 3673-3677
  
• Haiqun Wang, Yugui Zhang, Ling Meng, Zhikun Chen:
  The research of fire detector based on information fusion technology. 3678-3681
  
• Guijun Wu, Xiuli Guo:
  Digital prototyping and simulation of DG boiler feedwater pump. 3686-3688
  
• Jianping Ji, Yuan Wang, Jun Wang, Yeshui Gu:
  Study on the three-dimensional transient dynamic FEA of camshaft strength. 3689-3691
  
• Zhiwei Wang, S. M. Bosiakov:
  Analysis of parametric vibration of cylindrical shells considering material viscous damping. 3692-3695
  
• Tianfei Ma, Yang Mao, Jiehong Hu, Dengfeng Wang, Jing Chen:
  Simulation and experiment study of dynamic performance for a hydraulic mount using AMESim. 3696-3699
  
• Min Zhang, Shouyun Song, Na Yu:
  A variable polarity power supply based on 80C196KC control technology. 3700-3702
  
• Minzhen Wang, Guangxin Zhang:
  A comparative study on omni-directional vision sensors satisfying single viewpoint constraint condition. 3703-3706
  
• Tianfei Ma, Wenjun Zhao, Haitao Min, Juan Gao, Linying He:
  Fatigue life estimation of a light truck gearbox housing using multi-body dynamics and finite element method. 3707-3710
  
• Chungang Wang, Dongfang Huo, Yanxia Liu, Qinzhen Li, Jie Ren:
  Calibration of simulated vehicle speed in military motorized mobility. 3711-3714
  
• Chungang Wang, Yanxia Liu, Qinzhen Li, Dongfang Huo, Jie Ren:
  Study on the simulation of troops' motorization march. 3715-3718
  
• You Ren, Xia Liu, Guan Yan, Xiansheng Li, Mingtao Yang, Ji Zhang, Jingjing Li:
  Research on Chinese drivers' shifting quality evaluation based on simulative traffic environments. 3719-3722
  
• Xuejin Wang, Zhihong Zhang, Zhixin Pan:
  The design scheme analysis of energy efficiency fresh air system for residential building. 3723-3726
  
• Xuejin Wang, Zhihong Zhang, Zhonghai Chen:
  The influence of dynamic thermal characteristic of wall on air-conditioning load and thermal environment in building of different zoning for thermal design. 3727-3730
  
• Wenmei Shen, Jiao Qu, Ligang Zhang, Cuiping Wang:
  Developing the computer system in data processing of physical experiment. 3731-3734
  
• Wenmei Shen, Zhuqing Jiang, Yuting Wang, Lihong Ma:
  Imaging characteristics of 90-deg geometry volume holographic imaging system. 3735-3738
  
• Xingang Shi:
  The technology realizes the way in the construction energy conservation supervision system's function research. 3739-3742
  
• Xingang Shi:
  Residential building in hot summer and cold winter zone energy conservation transformation engineering research. 3743-3746
  
• Lijun Ma:
  The integrity rules and constraints of database. 3747-3749
  
• Jun Qiang Lian, Shun Yi Xie, Ding Wang:
  Analysis of the effect of discerption of surface PM pole on cogging torque of PM motor. 3750-3753
  
• Sufang Chen:
  Dispatching operation sheet system of power network based on multi-agent system. 3754-3757
  
• Guangli Chu:
  Brief analysis of how to solve data heterogeneity in the data interface of IPTV multi-services operation support system. 3758-3761
  
• Wei Zhang:
  Data exchange between IPTV multi-businesses operation support system and LivingRoom. 3762-3764
  
• Xiao Liu, Zhong Liu, Wenshu Hou:
  Missile threat assessment to fleet in the cooperative antimissile area. 3765-3768
  
• Huai Yang:
  Research on communication equipment configuration optimization of electronic information system based on genetic algorithm. 3769-3772
  
• Huai Yang:
  Design and implementation of P2P flow management system based on cache. 3773-3776
  
• Jianhua Guo, Liang Chu, Feikun Zhou, Libo Cao:
  Integrated control of variable torque distribution and electronic stability program based on slip angle phase. 3777-3780
  
• Di Xiao, Lanyue Zhang:
  The parameters estimation of underwater transient signal based on FRFT. 3781-3784
  
• Song-ru Qi:
  The solution of problem about fermat point in application of the modern pipeline design. 3785-3788
  
• Dayong Cao, V. M. Kotov:
  A best-fit heuristic algorithm for two-dimensional bin packing problem. 3789-3791
  
• Jianke Sha, Min Xu:
  Applying hybrid genetic algorithm to constrained trajectory optimization. 3792-3795
  
• Guowen Che, Lijun Ma, Liyuan Xu:
  An Excel model of analogue orthotropic plate method to calculate load transverse distribution coefficients. 3796-3799
  
• Qing Xie, Xiaoyao Xie:
  Point cloud data reduction methods of octree-based coding and neighborhood search. 3800-3803
  
• Yuyang Shi, Min Xu, Zi-ming Wang:
  Constrained trajectory optimization for hypersonic unpowered glider in near space using gauss pseudospectral method. 3804-3807
  
• Yuyang Shi, Min Xu, Zi-ming Wang:
  Integrated optimization of aerodynamic shape with trajectory for aircaft in conceptual design. 3808-3811
  
• Wei Xiao, Yuxue Pan:
  Virtual desgin and test of manual gear shifting bench. 3812-3815
  
• Wei Xiao, Yaxian Xu:
  The research of programming on embedded uBase-III system. 3816-3818
  
• Jiaojiao Fan:
  Research on the external factors of consumers releasing online comments. 3819-3823
  
• Xinhui Liu, Wei Wang, Xiaofeng Liu:
  Research for energy management mode of parallel hydraulic hybrid vehicle. 3824-3827
  
• Kai Sheng Zhang, XueWu Fan, Chuang Li, Kai Liu:
  Design and wavefront sensing for the segmented spherical primary optical telescope. 3828-3831
  
• Zhenbo Wang, Zhenning Zhao, Xinyan Liu:
  Performance testing of automatic transmission. 3832-3835
  
• Jijun Zhang, Xinyu Jia, Xianli Liu, Genghuang He:
  Static and thermo-mechanical coupled analysis of turing tools based on ANSYS. 3836-3839
  
• Fujun Ren, Xinhua Zhang, Long Wang:
  A new method of the image pattern recognition based on neural networks. 3840-3843
  
• Yanzhong Jin, Zongjie Cao, Yangtao Yu, Fengbo Han:
  The fault diagnosis of aerodynamical and structural performance for icing wing. 3844-3847
  
• Yangtao Yu, Ye Dai, FaMing Pan, Long Ma:
  Virtual prototyping simulation of minitype universal docking mechanism based on ADAMS. 3848-3851
  
• Guiming Shi, Huajun Dong:
  Design and implementation of signal generator based on AD9850. 3853-3855
  
• Ruixia Cui, Mingjun Wei:
  Research and application of Successive Over-Relaxation Iterative Algorithm. 3856-3858
  
• Li Yong:
  Grey incidence analysis on China's e-commerce development. 3859-3862
  
• Yi Tan, Yang Wang, Lei Wang, Jiaze Sun:
  Simulation research on the aircraft orbit transferring based on dragging force using STK. 3863-3866
  
• Yarn Zhang, Yuming Han:
  Virtual prototyping technology in research and development of new composite piling machine. 3867-3871
  
• Fengxia Li, Yang Zhou, Lingyu Zhang:
  Database design in EPR system structure of automotive electronics company. 3872-3876
  
• Ligong Sun, Fei Xiang, Xiangwen Sun, Sujuan Li:
  Design of industrial robot controller based on system on programmable chip. 3877-3880
  
• Chao Li, Xiaopeng Yang, Feng Wang, Hengyang Zhang, Yunjiang Liu:
  A frequency prediction method based on estimation of the ionospheric characteristics. 3881-3884
  
• Hou Xuan:
  Research on Quantum Adaptive Resonance Theory Neural Network. 3885-3888
  
• Nan Li:
  Access pricing model of telecommunication interconnection. 3889-3892
  
• Xuan Hou:
  Research of model of Quantum Learning Vector Quantization Neural Network. 3893-3896
  
• Zhongkui Sun, Hui Sheng, Mingjun Wei, Jiongzhao Yang, Hao Zhang, Lili Wang:
  Application of web log mining in local area network security. 3897-3900
  
• Yan Huang, Xiaodong Liu:
  On cooperation between enterprises with a supply chain alliance. 3901-3904
  
• Ruiying Zhou, Qiuhong Fan, Mingjun Wei:
  Solving for multimodal function with high dimensions base on Hopfield Neural Network and immune algorithm. 3905-3908
  
• Zhilin Luo, Wandong Cai, Yongjun Li, Dong Peng:
  The correlation between social tie and reciprocity in social media. 3909-3911
  
• Jie Liu, Lihua Li, Xia Liu:
  Design of flash-based storage system based on PCI Express bus. 3912-3914
  
• Haiyan Liu, Yuwen Cheng, Zhaohong Yang, Zhanjun Zhang:
  Research on security testing of information system based on interface communication. 3915-3918
  
• Haijun Gu, Yufeng Diao, Wei Liu, Xueqian Zhang:
  The design of smart home platform based on Cloud Computing. 3919-3922
  
• Tianbing Li:
  On KNN and SVM text classification technology in knowledge management. 3923-3926
  
• LingYun Zhao, FangAi Liu:
  Service-oriented pricing and resource allocation in Grid computing environment. 3927-3930
  
• Aili Sun, Jie Liu, Wenkai Liu:
  The laser-beam welding of ferritic stainless steel for the motor vehicle exhaust 409L. 3931-3933
  
• Runping Wu, Qiaoling Li, Xiaoxia Liu:
  Development of nanometer wave-absorbing materials. 3934-3937
  
• Lihua Li, Long Li, Jie Liu:
  Application of modeling technology in driving simulator system. 3938-3942
  
• Hengyang Zhang, Xiaoping Chen, Bo Zheng, Yequn Wang:
  Analysis of connectivity requirement for aeronautical Ad hoc networks. 3943-3946
  
• Weihua Wu, Ruilian Hou, Ning Yuan:
  Implementation of dynamic change method of multi-group collaborative work. 3947-3949
  
• Ning Yuan, Hong Luan, Weihua Wu:
  Conflict detection mechanism supporting simultaneous multi-group collaborative workflow. 3950-3952
  
• Zhicheng Huang:
  Research on fatigue life of the casting crane's girder by using damnification limits design method. 3953-3955
  
• Chunjie Yang, Ji Yao:
  The design of distributed control system based on CAN Bus. 3956-3958
  
• Xinjun An, Na Su:
  A dynamic filtering recommendation algorithm based on topic. 3959-3962
  
• Kun Mu, Xiaoyu Ma, Xiaobin Mu, Dalei Zhu:
  Study on passivity-based control of voltage source PWM DC/AC inverter. 3963-3967
  
• Li Li, Zehua Gao, Yazhou Wang:
  NFC antenna research and a simple impedance matching method. 3968-3972
  
• Zhaofeng Chen, Wanli Kou, Shuchao Guo, Daifeng Zha:
  New frequency spectrum estimation for the Spacial Transient Optical. 3973-3976
  
• Ke Li, Zhimin Wang, Jinzhan Yang, Wei Zhang:
  Research on road model based on steady speed of road section. 3977-3980
  
• Yingbo Zhao, Yanming Zhou, Xue Xin, Xiaoli Hao:
  Determination of gibberellin residue in vegetables and fruits by HPLC-MS/MS method. 3981-3985
  
• Yujuan Liang, An Su:
  Study on traffic flow affected by the ultra-high of road turning. 3986-3990
  
• Jianfeng Cui, Jilun Liu:
  A novel switched reluctance motor drive system. 3991-3994
  
• Jianfeng Cui, Yanping Su:
  Research and design on power converter for switched reluctance drive. 3995-3998
  
• Jingjing Chen, Hao Guo, Peiqing Liu, Yaping Wang:
  The summary on atmospheric disturbance problems in the motion imaging of high resolution earth observation system. 3999-4003
  
• Xin Lu, Zhiliang Liu, Peng Peng, Guoqing Wu:
  Comparison of two filter media for nuclear, chemical and biological filter applications. 4004-4006
  
• Zhiliang Liu, Xin Lu, Peng Peng:
  Comparison of two mathematical models for predicting the fallout hazard from terrorist nuclear detonations. 4007-4009
  
• Zhenzhong Wang, Yao Wang:
  An improvement SSL protocol application research. 4010-4013
  
• Ji-hua Wen, Li-Ping Jia, Ping Ling:
  Study on making high side-mode suppression ratio fiber Bragg grating. 4014-4016
  
• Wen-guang Liu, Jing-hua Feng, Jia Xu:
  The application research of parametric design in de-airing pug press. 4017-4019
  
• Yue-hong Zhu, Hai Qi, Guang-xiang Wang:
  Temperature characteristic of fiber Bragg grating. 4020-4022
  
• Xiao-bo Ning, Quan-sheng Jiang:
  A digital design method of geometric model for centrifugal fan impeller based on SolidWorks and VB. 4023-4026
  
• Ping Liang, YaMei Li:
  The design of measurement and control system of the radon detection instrument based on MCU. 4027-4029
  
• Ping Liang, Guang-xiang Wang, Ji-hua Wen:
  The detection filter choice of the OSL dating instrument. 4030-4032
  
• Guangxiang Wang, Liangxun Shuo, Juguang Li:
  Low background liquid scintillation analyzer circuit design. 4033-4036
  
• Yanjun Li, Yongwei Mao:
  An independent motion controlling method towards virtual 3D scene. 4037-4040
  
• Xuanguo Xu, Zhongmei Liang:
  CODP positioning based on extension superiority evaluation model. 4041-4047
  
• Yongwei Mao, Yanjun Li:
  An efficient method of 3D road automatic generating. 4048-4051
  
• Jinya Jiang, Min Nie, Xiaohui Liu:
  A study for transmission scheme of entanglement signaling of quantum mobile communication radio interface. 4052-4055
  
• Xiankun Zhao, Feiyan Zhao:
  APF implementation methods of inverter output constant voltage control. 4056-4058
  
• Zhicheng Huang:
  Study on the impact of energy consumption on the mainframe structure of two beam-type automatic hydraulic tile press. 4059-4061
  
• Aimei Dong, Ruilian Hou:
  The research and application of object-oriented requirements modeling based on UML. 4062-4065
  
• Yan Zhang, Xiaoli Liu:
  The achievement of Cash Management System. 4066-4068
  
• Qin-ying Lin, De-qin Shi, Lei Huang, Xiao-lin Gui, Ya-nan Kou, Xiao-ping Wang:
  Worm defense system research based on intelligent maintenance trees. 4069-4072
  
• Xiaozhou Yu, Jun Zhou, Yanbo Guo, Rui Hou:
  The design of the three-dimensional object movement simulation system. 4073-4076
  
• Biying Zhou:
  Research of neural network model prediction strategy based on PSO-BP algorithm. 4077-4080
  
• Biying Zhou, Peng Zhang:
  Analysis of modeling and simulation of Buck-boost converter considering dynamic phasor method. 4081-4084
  
• Shouchun Zhang, Junbo Gao:
  Design of autopilot steering alarm system on ship based on CAN-bus. 4085-4088
  
• Shouchun Zhang, Junbo Gao:
  Analysis and design of synchro drive system on ship based on ARM. 4089-4092
  
• Weihong Chen, Weichu Xiao:
  Model checking and analyzing the security protocol for wireless sensor networks. 4093-4096
  
• Qian Du:
  A new GMSK modulation based on LUT. 4097-4101
  
• Peng Chena, Jian Chen, Xiong Shi:
  Design and implementation of real-time wireless sensor network based on ATA5823/4. 4102-4105
  
• Qiuting Jia, Guizhen Wang, Jinyong Cheng:
  A qualification system for high temperature sterilization. 4106-4109
  
• Li Wang, Zehua Gao:
  Research on an improved proposal of 3G security. 4110-4113
  
• Sujuan Li, Fei Xiang, Juwei Zhang:
  Design of PS2 keyboard controller IP core based on SOPC. 4114-4117
  
• Chunguang Lu, Lili Meng, Guanghui Zhang, Qiuyan Sun:
  Application of quality statistics tools in quality improvement of the spiral bevel gears. 4118-4121
  
• Wenqi Huang, Zhanghua Fu, Ruchu Xu:
  An efficient algorithm for solving the Arbitrary Sized Circle Packing Problem. 4122-4125
  
• Bin Sun, Shouren Wang, Yanjun Wang, Qin Zhao:
  High temperature oxidation resistance behavior of a FeCrAISi coating. 4126-4129
  
• Liang Yuan, Baiquan Lu, Mengyang Zhao:
  A new algorithm for global optimization based on feedback control system model and Latin squares. 4130-4134
  
• Jiejia Li, Hao Wu, Jinxiang Pian:
  The application of the equipment fault diagnosis based on modified Elman neural network. 4135-4137
  
• XiangFeng Meng:
  Analysis of software automation test protocol. 4138-4141
  
• Wei Zhao:
  TM wave of finite-difference time-domain analyses. 4142-4145
  
• Wei Zhao:
  The design and research of Literary retrieval system based on Lucene. 4146-4148
  
• Jinxiang Pian, Jiejia Li, Jing Hou:
  Research on intelligent optimization control method and application. 4149-4153
  
• Xia Wang, Zhanjun Li:
  Effect of vibration frequency on friction and wear properties of Sic Ceramics/ 45 Steel friction pair. 4154-4157
  
• Lili Meng, Chunguang Lu, Xiaoyan Xi, Guanghui Zhang:
  Application of six Sigma method in improving the quality of box parts. 4158-4161
  
• Jianxin Wang, Xinli Zhang:
  Generalized elementary transformation and its application. 4162-4165
  
• Jianbin Zhang, Zhouhu Deng:
  Hydrothermal synthesis and optical properties of ZnO particles. 4166-4169
  
• Na Shi, Jinxiao Pan:
  Fast and robust skew detection for scanned documents. 4170-4173
  
• Xiaorui Zhang, Shujun Yao:
  Technology innovation and practice of long span traditional pure stone structure: Case from pure stone archway in Baoji new executive square. 4174-4178
  
• Guo Jing, Lin Qi:
  The research on requirement analysis of electronic information equipment SoS based on DoDAF. 4179-4182
  
• Yin Xi, Kang Ping:
  Measuring the performance of knowledge sharing in regional innovation. 4183-4187
  
• Moshu Wu, Guangda Su, Jun Zhou:
  A robust system of face detection and precise face organ location. 4188-4191
  
• Fei Li, Long Tian:
  Total meshing area changing disciplinarian of work meshing pair of oscillating-teeth end-face harmonic gear. 4192-4195
  
• Lizhi Wang, Si Tian, Ping Cheng, Guangjun He:
  Combined feedforward-feedback servo control scheme for a radar spy azimuth follow-up system. 4196-4198
  
• Yongping Li, Ping Cheng:
  Real-time reconstruction of orange tree model based on obstacle avoidance. 4199-4203
  
• Xiaoyou Li, Runze Lan:
  Dynamic resource reservation MAC mechanism for distributed wireless networks. 4204-4207
  
• Fang Liu, Haiming Qi, Jianxun Li:
  Clutter polarization estimation based on an adaptive polarization filtering approach. 4208-4211
  
• Xiangping Su, Qi Lin:
  Research on credibility evaluation method for satellite network simulation system. 4212-4215
  
• Long Tian, Wei Zhang, Hai-bo Wang:
  Study on finite element method of power working device of hydraulic excavator. 4216-4219
  
• Yun Li, Yangwu Yao:
  Analysis and research about rocket aeroelasticity. 4220-4223
  
• Ming Yin, Shi-Quan Shao, Li Ma:
  A modified nonlocal-means for adaptive image denoising. 4224-4227
  
• Ruobei Tong:
  The traditional retail trade development strategy in E-Commerce environment. 4228-4230
  
• Quansheng Jiang, Yepin Lu, Zuokui Hong:
  A neighborhood parameter optimization method of LLE based on topology preservation. 4231-4234
  
• Bing Wang, Xing Yang:
  The video and audio transmission system design and implementation for a helicopter by satellite-based communication channel. 4235-4238
  
• Pengyu Zheng:
  Radio frequency controlling and transmitting based on the USB chip CY7C68013A. 4239-4242
  
• Shihu Xu, Fang Song:
  Optimization for information visualization based on visual thinking. 4243-4247
  
• Shuai Nie, Changxing Pei, Xiandeng He, Ruyue Dong, Mei Wu:
  3G/4G mobile communications propagation loss NPL model and network optimization scheme under shelter of vegetation. 4248-4250
  
• Yao Yuan, Hong Yun, Zhangshi Qiu Huai:
  Design of a system for recognizing user's relationship based on GIS and mobile phone. 4251-4253
  
• XiangFeng Meng:
  Designing approach analysis on small-scale software performance testing tools. 4254-4257
  
• Jiming Huang, Wenbin Zhang, Rongqiang Chen:
  Selection and processing of surface roughness for mechanical parts. 4258-4261
  
• Xiangning Wang, Ying Chen, Qing Lin, Wenbin Zhang:
  The thinking of promotion and using green building materials. 4262-4265
  
• Rongqiang Chen, Yingmin Gao, Jiming Huang, Wenbin Zhang:
  Study of friction hot forming technology of hydraulic cylinder at both ends. 4266-4269
  
• Ming Yin, Li-wei Wang, Shi-Quan Shao:
  A novel method for weak multi-audio frequency signal detection. 4270-4272
  
• Li Zhao, Wenbin Xie, Guichu Wu, Xiaoqin Zhang:
  In-circuit programmer of STM8 based on MCU. 4273-4276
  
• Wei Lin, Bingcheng Yuan, Qin Li, Houpu Li:
  Two improved sailing algorithms for the accurate track calculating. 4277-4280
  
• Xiufeng Cheng, Zhu Song:
  An automatic assignation application for faculty members. 4281-4284
  
• Xiaoming Liu, Jing Peng, Tao Liu:
  A novel indoor localization system based on passive RFID technology. 4285-4288
  
• Wen-wen Luo, Xing-yu Chen:
  A research on flexible business process management system based on knowledge base and semantic web services. 4289-4292
  
• Yufei Zhao, Xingyu Chen:
  Improvement and analysis of GA on finding QoS routing. 4293-4296
  
• Fei Xue, Ye Jiang:
  Design of Integrated Fault Management System based on intelligent mobile terminal. 4297-4300
  
• Jiangsong Lu, Nan Wang, Jing Chen, Fei Su:
  Cooperative path planning for multiple UCAVs using an AIS-ACO hybrid approach. 4301-4305
  
• Lixin Gao:
  High performance Complementary Pass transistor Logic full adder. 4306-4309
  
• Jing Yang, Yanjun Liu:
  Sensitivity analysis of spiking neuron synapse. 4310-4313
  
• Chao Yu, Jingkui Li, Jianye Guo, Yanli Zhang:
  Effect of thermohydrogen treatment on machinability of TC21 alloy. 4314-4316
  
• Yun-hang Zhu, Ping-hua Zhang, Ming-yuan Deng:
  Simulation research on direct sequence spread spectrum communication system over Rayleigh Fading Channels. 4317-4321
  
• Haiyan Shao, Yuzhen Ma, Xiuhua Men:
  The denoise design of pressure reducing control valve in thermal power plant. 4322-4325
  
• Zhong-ye Yang, Jin-qiu Xiao:
  The design and simulation of array multiplier improved with pipeline techniques. 4326-4329
  
• Wen-hai Li, Yi-ping Wang, Yong-shuang Shang, De-qiang Yin:
  Research on health assessment based on Hidden Markov Model. 4330-4332
  
• Yong-shuang Shang, Ding-guo Wang, Wen-hai Li, Zhong-de Wu:
  Research on Integrated Grounds Health Management for aviation gyroscope. 4333-4336
  
• Tang Li, Zuwei Yu:
  Adoption barrier, financial imperfection and technology diffusion. 4337-4341
  
• Tang Li, Zuwei Yu:
  Appropriate technology, credit constraint and economic transition. 4342-4346
  
• Zuwei Yu, Tang Li:
  Investment protection, financial imperfection and endogenous technological change. 4347-4350
  
• Lu Gao, Li-Yong Zhou:
  The improvement of RIA's software framework in Flex. 4351-4354
  
• Jing Zhang:
  Evolutionary stable strategy model in multi-application enterprises. 4355-4357
  
• Xiang Tan, Bo Ai:
  The issues of cloud computing security in high-speed railway. 4358-4363
  
• Dongping Liang, Hongyou Chai, Tianzhi Chen:
  Landing dynamic analysis for landing leg of lunar lander using Abaqus/Explicit. 4364-4367
  
• Yuan-lin Song, Xin-pu Shi, Jian-de Liao, Jin-di Wang:
  The application of TeeChart control in natural gas development. 4368-4370
  
• Zhao Wang, Zuwei Yu:
  An empirical research of the business cycle synchronization among the GCC. 4371-4376
  
• Zhidong Hu:
  Friction torque of rotating hydraulic cylinder with fleet circular groove oil film face seal. 4377-4380
  
• Baohai Yang:
  The design of 3 ∗ 3 real time VideoImage convolver on the basis of FPGA. 4381-4384
  
• Zhiwei Wang, Bo Wu, Da Huo, S. M. Bosiakov:
  Vibration analysis of anisotropic circular cylindrical shells with varying winding angle. 4385-4388
  
• Xirong Li, Yongbiao Hu:
  Monte Carlo simulates the light migration in compacted subgrade. 4389-4392
  
• Xianglei Zhang, Kai Wang, Yanan Zhao:
  Electrical vehicle crash test technique research. 4393-4396
  
• Zhongshuang Wang, Jianguo Cao, Jianhua Wu:
  The dynamic modelling and simulation of planar linkage containing translational joint based on vector bond graph. 4397-4401
  
• Chengwei Wang:
  α Extension of a class of trigonometric spline curve. 4402-4404
  
• Xu Wang, Dazhi Wang:
  Calculation of eddy current loss and thermal analysis for adjustable permanent magnetic coupler. 4405-4408
  
• Hao-yang Yu, Li-ping Shi:
  The study of tracking control of electro-hydraulic servo system with feed forward and fuzzy-integrate control. 4409-4412
  
• Jian Ding, Mao Ye:
  A novel way for fire detection in the video using Hidden Markov Model. 4413-4416
  
• Jiansheng Zhang:
  Study of point-based digital modeling platform. 4417-4420
  
• Ping Jiang, Kang Xie, Zhenhai Wu:
  Negative refraction effect in two dimensional square and hexagonal photonic crystal. 4421-4424
  
• Cheedoong Drung, Jianwen Wang, Ning Guo:
  Enhance performance of program automatic online judging systems using affinity algorithm and queuing theory in SMP environment. 4425-4428
  
• Xushan Peng, Yanyan Wu:
  Research and application of algorithm for mining positive and negative association rules. 4429-4431
  
• Hui Zhai, Jiyun Li, Rui Zhai:
  New method to skin deformation driven by dual quaternions based on LBS. 4432-4434
  
• Lili Chen, Ying Li, Heshan Guan:
  Research on interactive design for network multimedia digital newspaper. 4435-4438
  
• Cong'an Xu, You He, Qingqing Yao, Tao Jian:
  A modified robust CFAR detector. 4439-4442
  
• Hui Peng, Yue Tian:
  The analysis of correlation of China and international steel market. 4443-4445
  
• Daquan Tang, Fei Li, Ning Shen, Shaojun Guo:
  UAV attitude and position estimation for vision-based landing. 4446-4450
  
• Lingcai Kong, Yanpeng Ma:
  Load forecasting based on kernel-based orthogonal projections to latent structures. 4451-4454
  
• Xingguo Wang:
  The study on longitudinal wave and transverse wave propagation behavior in FRP composite material. 4455-4458
  
• Qixiao Xia, Ziping Liu, Hong Lei, Jianhui Zhang:
  Theoretical analysis and experimental varification on valve-less piezoelectric pump with zigzag chamber bottom. 4459-4462
  
• Qiang Li, Baolong Su, Hongbo Yan, Ziliang Wei:
  Research on NC manufacturing of a new spiral bevel gear. 4463-4466
  
• Junwei Lv, Ning Guo, Cheedoong Drung:
  Prediction and estimation to the maneuvering target in opto-electronic tracking system based on robust extend Kalman filter. 4467-4470
  
• Xia Xie, Xiaobao Zhang, Jumin Jia, Gao Bo:
  Coordinate measuring of the variable ratio noncircular bevel gear. 4471-4473
  
• Yong Shi, Kuan Huang, Changtao Wang, Bin Ma:
  Study on human-simulated intelligence elevator controller - Based on SCM. 4474-4477
  
• Xiao Mi:
  Intake port development flow of 4-valve diesel engines based on RE/CFD/CAM. 4478-4481
  
• Shudi Zhang, Yuchun Zhai, Zhenfang Zhang:
  Preparation and properties of magnetic scensitive hydrogel. 4482-4484
  
• Shudi Zhang, Yuchun Zhai, Zhenfang Zhang:
  Study on medical polyvinyl alcohol (PVA) / polyvinyl pyrrolidone (PVP) hydrogel burns dressing. 4485-4488
  
• Yuexi Zhou, Ximiao Zhang:
  Exploring the methods of using the Chinese traditional folk-custom color cultural representations on the industrial design. 4489-4492
  
• Lei Zhu, Yingxue Yao, Peng Xu, Zhuo Bian:
  Study on space station design elements for intra-vehicular navigation: A survey. 4493-4496
  
• Xiaoqiang Yang:
  Research of General Aviation flight data analysis. 4497-4499
  
• Fang Zhao, Xinjun Zhao, Yaofei Ma:
  Design of distributed simulation experiment's control & management system. 4500-4504
  
• Shunzhong Jiang, Jian Yuan:
  Ultrasound-based measurement of relative blood volume. 4505-4507
  
• Lishuang Liu, Hanchang Zhou, Wei Li, Hualing Guo:
  Structure design and optimization of high-g piezoresistive accelerometer. 4508-4511
  
• Zhaohu Deng, Yanqin Zhang:
  Research on the cold-storage door control based on frequency conversion technology. 4512-4515
  
• Hao Lu, Zhenzhan Wang, Guoxing Gao:
  Design of high-speed sampling circuits. 4516-4519
  
• Rui Xie, Tiehua Ma, Yaoyan Wu, Zhankui Xie:
  Study on torque measurement of revolving shaft based on capacitive grating sensing technology. 4520-4523
  
• Zunyi Deng, Yi Ning, Xueqin Gao, Zhongying Wang:
  The design of distributed robot control system. 4524-4526
  
• Zhen Xue, Liangliang Zhang, Jinxiao Pan:
  A new algorithm for calculating the radiological path in CT image reconstruction. 4527-4530
  
• Xuelin Wang, Yongguo Zhao, Xinjian Fan, Hao Wu:
  Active gripping impedance force control with dual fingers hand. 4531-4534
  
• Ling Zheng, Qing Zhao:
  Simulation of the electromagnetic waves transmission in plasma. 4535-4537
  
• Weibing Gan, Yueming Wang:
  Application of the distributed optical fiber grating temperature sensing technology in high-voltage cable. 4538-4541
  
• Qiang Qi, Qinggui Chen, Yuan Zhou, Haiyang Wang, Hongmei Zhou:
  Submarine-launched cruise missile ejecting launch simulation and research. 4542-4545
  
• Juan Li, Yonglong Tan:
  An effective segmentation method - Internal radius template method for quasi-round fruit. 4546-4549
  
• Jianhua Yang, Rong Feng, Wei Deng:
  A new algorithm of image denoising based on stationary wavelet multi-scale adaptive threshold. 4550-4553
  
• Jun Wang, Chongzhao Han, Yonggang Hu, Tiesheng Chen, Yanfeng Chen:
  Markers rectifying in the motion capture system. 4554-4558
  
• Xuelin Wang, Yongguo Zhao, Xinjian Fan, Jianghua Zheng:
  Parallel gripping explicit force control of robot hand with dual fingers. 4559-4562
  
• Ling Cheng:
  Study and application of DNP3.0 in SCADA system. 4563-4566
  
• Junli Liu:
  Attack and defense information systems. 4567-4569
  
• Chunfeng Ye:
  The advantages research about the SSHDWR+AJax design pattern in software developmen. 4570-4573
  
• Chunrong Li, Xinzheng Wang, Yanbin Feng, Peng Jiao:
  Analysis of coupling onto wires enclosed in cylindrical cavity. 4574-4577
  
• Yue Ma, Yu Chang, Chunyu Xia:
  Applied research on stock forcasting model based on BP neural network. 4578-4580
  
• Zhankui Xie, Rui Xie:
  The development of integrated static and dynamic mechanical test-bed. 4581-4584
  
• Yuanyuan Zheng, Zailiang Chen:
  Parametric design of straight spur gears based on Pro/E. 4585-4589
  
• Li Bing, Chen Hua:
  The research of the PID controller based on FPGA. 4590-4592
  
• Ping Zhang, Gunxian Yang, Zhiyong Zhang:
  Analytic study on micro electromechanical systems sensor. 4593-4596
  
• Ling Shi, Chunlei Sun, Qing'en Li:
  A pressure sensor of the industry. 4597-4599
  
• Xianghua Hou, Honghai Liu:
  Super-resolution image reconstruction for video sequence. 4600-4602
  
• Jun-wei Sun, Ya Zhang:
  The algorithm research of penetration distance based on normalization processing. 4603-4606
  
• Ran Yu, Zhouxing Fu, Qingliang Wang, Shangbin Sun, Haidong Chen, Qi Xu, Xuejie Chen:
  Modeling and simulation analysis of single phase arc grounding fault based on MATLAB. 4607-4610
  
• Kun Mu, Xiaoyu Ma, Xiaobin Mu, Dalei Zhu:
  A new nonlinear control strategy for three-phase Photovoltaic grid-connected inverter. 4611-4614
  
• Yanru Dong:
  Ant algorithm in train enquiry system. 4615-1617
  
• Wenguang Zheng, Yao Yao, Ping Tang:
  The design of hydraulic control system about bidirectional compressing refuse collector based on PLC. 4618-4621
  
• Yan Chen, Li Ma, Qingping Guo:
  A parallel GA-BP neural network algorithm for solving inverse heat conduction problem. 4622-4625
  
• Zhiyi Chen, Suihua Zhou, Anlin Jiang:
  Miniaturization design on magnetic induction sensors. 4626-4629
  
• Yaqi Zhang, Chunhua Yin, Gang Zhao:
  FP-tree algorithm applied in logistics warehousing mining. 4630-4634
  
• Yudong Yang, Liqun Huang-Fu:
  Design of tester of porcelain insulator ultrasonic detection based on embedded technology. 4635-4638
  
• Chen Zhang, Mengyang Zhao, Liang Yuan:
  An improved algorithm for corner detection. 4639-4641
  
• Xiaolin Yu:
  Finite element analysis of influence of grinding parameters on grinding force. 4642-4645
  
• Xianghua Hou, Honghai Liu:
  Face feature extraction based on reduced-dimension matrix of DCT and projection of block covariance matrix. 4646-4648
  
• Wenjie Zhang, Donghui Zhao:
  The research of numerical control system acceleration and deceleration technology. 4649-4652
  
• Yongliang Wang, Zhansheng Liu:
  Study on tilting characteristic of pads in tilting pad bearing. 4653-4657
  
• Cong-hua Hou, Yu-ling Lu, Jing-yu Wang:
  Study on preparing crystalline C3N4. 4658-4660
  
• Xiaoming Han, Yucheng Bo, Qiang Li:
  Dynamic analysis on gas operated device's of internally-powered Gatling weapon. 4661-4664
  
• Zhongyuan Lee, Ying Wang, Wen Zhou:
  A dynamic priority scheduling algorithm on service request scheduling in cloud computing. 4665-4669
  
• Wanli Jiao, Jin Guo, Rongwu Chen, Wudong Yang:
  Guideway database design in CBTC system simulation. 4670-4673
  
• Guangzheng Bai, Jin Guo, Guangliang Bai:
  An algorithm design concerning wind monitoring and alarm along the train line. 4674-4677
  
• Dong Yang, Yonghong Huang, Gaohong Xu:
  Design of indoor swimming pool water temperature control system based on fuzzy controller and Smith predictor. 4678-4681
  
• Huixin Zhang, Xiaobin Hu, Suhua Liu, Haiguang Yang:
  Design of multi-channel signal acquisition module for separate storage. 4682-4685
  
• Dan Zeng, Hui Ji:
  On the construction of the multimedia network TCSL dictionary. 4686-4688
  
• Liming Liu, Fengxuan Jing, Xiaoyao Xie, Xiaojie Liu:
  Hybrid-based segmentation of massive three-dimensional point cloud data. 4689-4692
  
• Jihui Chen, Xiaoyao Xie, Fengxuan Jing:
  The security of shopping online. 4693-4696
  
• Wei Liu, Dedao Gu:
  Research on construction of smart medical system based on the social security card. 4697-4700
  
• Long Wu, Xue-tao Qiao:
  Study on the model and balancing of automobile assembly line based on Lingo. 4701-4704
  
• Xuejie Chen, Zhouxing Fu, Jianwen Zhao, Shangbin Sun, Haidong Chen, Ran Yu:
  Analysing the feature of instantaneous positive sequence network when single-phase grounding in resonant grounding system. 4705-4708
  
• Yiming Li, Jun Rong, Shuai Huang:
  Technology study of new industry data collection and monitoring system. 4709-4712
  
• Yiming Li, Jun Rong:
  The study of new modeling method for permanent magnet brushless DC motor. 4713-4716
  
• Junxiu Liu, Zongquan Deng, Honghao Yue:
  Topological optimization of pedestal based on variable density method. 4717-4720
  
• Xuemei Hu, Yang Liu:
  Principle and running maintenance on UPS power supply. 4721-4723
  
• Xiao-Qin Liu:
  A method for fault diagnosis in chemical reactor with hybrid neural network and genetic algorithm. 4724-4727
  
• Yang Yang, Yupu Hu, Fengrong Zhang, Fenghe Wang:
  New construction of identity-based encryption with wildcards. 4728-4731
  
• Wenjun He, Guanghui Min, Oleg Tolochko:
  In-situ high temperature XRD studies and crystallization behavior of a Ti-rich Ti-Ni-Cu ribbon. 4732-4736
  
• Shenpei Chen, Zhen Liu, Mingyu Xia, Junhui Wei:
  A target recognition matching method with high reliability. 4737-4740
  
• Qi Chen, Qizhi Huang, Zhuping Yang:
  Network database application in military academy assistant courses arrangement system based on XML. 4741-4744
  
• Zhuping Yang, Qi Chen, Haizhen Liang:
  The design of sound simulating systemin vehicle driving training simulator. 4745-4748
  
• Yanli Wang:
  A combined interference cancellation multiuser detector design for STBC-OFDM systems. 4749-4752
  
• Xiaofei Jing:
  Provably secure certificateless signcryption scheme without pairing. 4753-4756
  
• Lianmin Hu:
  A novel method of network traffic anomaly detection. 4757-4759
  
• Min Zhang, Zhijian Hou, Hongwei Bai, Qiufeng Yao:
  An on-line thickness measurement system based on TMS32DF2812. 4760-4762
  
• Gang Feng, Huashun Yu:
  Effects of Sr on the microstructure and performance of Mg-Al alloy. 4763-4765
  
• Yuntian Wu, Shuling Li:
  Based on the Internet to strengthen information acquisition and knowledge study. 4766-4769
  
• Nuan Feng, Yong Chen:
  Synchronization algorithm of ultra wideband communication. 4770-4772
  
• Xingyu Liu, Wei He:
  A location management to support micro-mobility of HIP. 4773-4775
  
• Wenjing Wang, Tingjie Lv:
  Research on multi-source information service system architecture based on cloud computing. 4776-4778
  
• Na Li, Yindi Yao, Juan Guo:
  A new video-based highway management information system. 4779-4781
  
• Jiawang Yan, Weiqing Ge, Ping Zhou, Bo Xiang:
  Study on output increase of cement mill by slightly accelerating revolving speed. 4782-4784
  
• Bo Xiang, Ping Zhou, Kun Dai, Xiuying Wang:
  The soft reconstruction of stratifying machine based on S7-400PLC. 4785-4787
  
• Yuanyong Liu, Bo Zheng, Qingwen Qu:
  Analysis of the wear of gear transmission. 4788-4790
  
• Feng Zhao, Licheng Jiao:
  Spatial improved fuzzy c-means clustering for image segmentation. 4791-4794
  
• Ji Yao, Hongbo Kang:
  FPGA implementation of dynamic key management for DES encryption algorithm. 4795-4798
  
• Xiao Tang, Lejiang Guo, Wenjie Tu, Liang Liu:
  Design pattern's application. 4799-4801
  
• Lihua Zhang, Gaoyuan Liu, Xinfa Dong:
  Improved algorithm of ontology mapping based on semantic Web. 4802-4804
  
• Xiujuan Zhang, Chao Chen, Lina Ni, Jinquan Zhang:
  Fingerprint minutia extraction algorithm based on DSP. 4805-4808
  
• Yuan Gao, Yi Li, Hongyi Yu, Tao Zhao, Shihai Gao:
  Implementation and analysis of CoMP in 3GPP LTE system level simulator. 4809-4811
  
• Jianan Wu, Wei Wang, Jinhong Zhang, Bodong Wang:
  Research of a kind of new UAV training simulator based on equipment simulation. 4812-4815
  
• Liang Miao, Dan Dan Cui:
  Creative design of multimedia educational software based on technical support. 4816-4818
  
• Yindi Yao, Peng Xu, Zhibin Zeng:
  Algorithm on improved M-ary spread-spectrum communication. 4819-4822
  
• Ke Xiang, Chaohao Su:
  Bionic design of building structure based on digital technology - The design of the structural morphology of Muping Sports Center. 4823-4826
  
• Xing Wang, Haifeng Qian:
  A novel identity-based signature with message recovery from RSA. 4827-4831
  
• Yu Zhang, Liang Jiao, Jie Liu:
  Optimization design of ADRC for oxygen content in flue gas based on chaos particle swarm optimization algorithm. 4832-4837
  
• Zhoupeng Ji, Feifei Zhao:
  A new guaranteed cost control method of T-S fuzzy system with time-delay. 4838-4844
  
• Ying Zhang, Guijin Han:
  PWM Control Design Principle for the High Voltage Invert with High Power. 4845-4848
  
• Yu Zhang, Shengjun Shao, Min Zhao, Linghua Liu:
  Research on bearing capacity of inclined pile under vertical load. 4849-4852
  
• Hong Li, Shuhui Shi:
  Robust passive control for singular systems with time-delay and uncertainties. 4853-4855
  
• Yongliang Li, Lijuan Sun, Yanli Wang:
  An adaptive image enhancement algorithm based on human visual properties. 4856-4859
  
• Zhenhai Wu, Kang Xie, Ping Jiang, Jianchen Wan:
  Compact terahertz wave beam splitter based on self-collimating photonic crystals. 4860-4863
  
• Yi Liu, Hongli Hu:
  An improved protocol for optimistic multi-party fair exchange. 4864-4867
  
• Xu Fei:
  A solution for measuring the dielectric spectroscopy of conductive aqueous solution. 4868-4870
  
• Fengnan Liu, Yuzhen Ma, Xueren Dong, Xiaowei Yang:
  Application of 3G technology in mariculture dynamic monitoring. 4871-4874
  
• Jianhui Tan:
  A new algorithm of infrared gait detection based on immune ant colony. 4875-4878
  
• Liang Miao, Bin Zhong:
  The construction of educational software development platform based on Flash. 4879-4882
  
• Hongbo Kang, Chunjie Yang:
  The design of a pot light tracking system based on MSP430. 4883-4886
  
• Na Li, Min Shi, Wujun Yang:
  Design and realization of traffic information collection and detection system based on linear CCD. 4887-4889
  
• Chunxia He:
  The digital filter method designing of angular rate of the servo control system in low speed. 4890-4893
  
• Yanli Yang, Hanbing Fang:
  Differential clonal selection algorithm for solving constrained optimization problems. 4894-4898
  
• Youfu Hou, Qiangqiang Han:
  Numerical simulation of hydro-viscous winch starting performance. 4899-4901
  
• Feng Wang, Baoliang Wang, Hengyang Zhang, Yanwei Wang, Chao Li, Yunjun Qi:
  Air ground radio equipments centralized remote control based on CAN bus. 4902-4905
  
• He Li, Bo Yin, Shanshan Wang, Qingshu Yang:
  Design of underwater robot controller based on CAN bus. 4906-4909
  
• Shanshan Wang, Bo Yin, He Li, Qingshu Yang:
  Multi-motor control system design based on Can bus. 4910-4913
  
• Lirong Qiu, Yu Weng, Xiaobing Zhao, Guosheng Yang:
  Enrichment of semantic ontology in Tibetan language by extracting concepts with hyponymy patterns. 4914-4917
  
• Yisheng Miao, Huarui Wu, Huaji Zhu, Feng Li, Feifei Li:
  Low power design based on seed circulation Supervisory Hand-held device. 4918-4920
  
• Anan Xu, Hailin Yang:
  The prospect of using multi-sensor information fusion technology in flight data application. 4921-4923